Wi Lan Inc EB02 用户手册

Configuration

58

 AWE 120-58 Installation & Configuration Guide

6.

Check for BER = 0.0E+00 and CorrP between 15 – 50 dB

. 

If the CorrP is <15 dB the receive signal is 

probably too weak. If the power is >55 dB the receiving unit is probably saturated. 

If you have problems ensure that the unit is configured to its basic default settings (see 

, page 99) and reconfigure the unit, or contact Wi-LAN customer support.

7.

To end the test, briefly disconnect power from the unit or press and hold the Mode button to return to 
Normal mode.

BER

Bit Error Rate

MPC

Missed Packet Count

EnvP

Envelope Power—the power of the received signal inlcuding noise, 
measured in dB (0–63)

CorrP

Correlation Power—the power of the received signal, excluding noise, 
measured in dB (0–63)

- BER = 0.0E+00, MPC =          0, EnvP = 63, CorrP = 63

| BER = 0.0E+00, MPC =          0, EnvP = 63, CorrP = 63

Bit Error Rate

Missed
Packet
Count

Envelope Power

Correlation Power

Previous
Sample

Current
Sample