Radicom Research Inc WIFIHU2S 用户手册
Earthworks Legal and Regulatory Guide | 15
4
Safety information
Most accidents that involve product operation, maintenance and repair are caused by
failure to observe basic safety rules or precautions. An accident can often be avoided by
recognizing potentially hazardous situations before an accident occurs. A person must be
alert to potential hazards. This person should also have the necessary training, skills and
tools to perform these functions properly.
failure to observe basic safety rules or precautions. An accident can often be avoided by
recognizing potentially hazardous situations before an accident occurs. A person must be
alert to potential hazards. This person should also have the necessary training, skills and
tools to perform these functions properly.
Improper operation, lubrication, maintenance or repair of this product can be dangerous
and could result in injury or death.
and could result in injury or death.
Do not operate or perform any lubrication, maintenance or repair on this product, until
you have read and understood the operation, lubrication, maintenance and repair
information.
you have read and understood the operation, lubrication, maintenance and repair
information.
Safety precautions and warnings are provided in this manual and on the product. If these
hazard warnings are not heeded, bodily injury or death could occur to you or to other
persons.
hazard warnings are not heeded, bodily injury or death could occur to you or to other
persons.
The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such
as “DANGER”, “WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below.
as “DANGER”, “WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below.
WARNING —
This alert warns of a potential hazard which, if not avoided, can cause severe injury.
The meaning of this safety alert symbol is as follows:
Attention! Become Alert! Your Safety is Involved.
The message that appears under the warning explains the hazard and can be either
written or pictorially presented.
written or pictorially presented.
Operations that may cause product damage are identified by “NOTICE” labels on the
product and in this publication.
product and in this publication.
Trimble cannot anticipate every possible circumstance that might involve a potential
hazard. The warnings in this publication and on the product are, therefore, not all inclusive.
If a tool, procedure, work method or operating technique that is not specifically
recommended by Trimble is used, you must satisfy yourself that it is safe for you and for
others. You should also ensure that the product will not be damaged or be made unsafe by
the operation, lubrication, maintenance or repair procedures that you choose.
hazard. The warnings in this publication and on the product are, therefore, not all inclusive.
If a tool, procedure, work method or operating technique that is not specifically
recommended by Trimble is used, you must satisfy yourself that it is safe for you and for
others. You should also ensure that the product will not be damaged or be made unsafe by
the operation, lubrication, maintenance or repair procedures that you choose.