Radicom Research Inc WIFIHU2S 用户手册
Earthworks Legal and Regulatory Guide | 17
4 Safety information
Whenever there are attachment control linkages, the clearance in the linkage area will
increase or the clearance in the linkage area will decrease with movement of the
attachment. Stay clear of all rotating and moving parts.
increase or the clearance in the linkage area will decrease with movement of the
attachment. Stay clear of all rotating and moving parts.
Keep objects away from moving fan blades. The fan blade will throw objects or cut objects.
Do not use a kinked wire cable or a frayed wire cable. Wear gloves when you handle wire
cable.
cable.
When you strike a retainer pin with force, the retainer pin can fly out. The loose retainer pin
can injure personnel. Make sure that the area is clear of people when you strike a retainer
pin. In order to avoid injury to your eyes, wear protective glasses when you strike a retainer
pin.
can injure personnel. Make sure that the area is clear of people when you strike a retainer
pin. In order to avoid injury to your eyes, wear protective glasses when you strike a retainer
pin.
Chips or other debris can fly off objects when you strike the objects. Make sure that no one
can be injured by flying debris before striking any object.
can be injured by flying debris before striking any object.
4.4 Operation
Clear all personnel from the machine and from the area.
Clear all obstacles from the machine's path. Beware of hazards (wires, ditches, etc).
Be sure that all windows are clean.
Secure the doors and the windows in the open position or in the shut position.
Adjust the rear mirrors (if equipped) for the best visibility close to the machine.
Make sure that the horn, the travel alarm (if equipped), and all other warning devices are
working properly.
working properly.
Fasten the seat belt securely.
Warm up the engine and the hydraulic oil before operating the machine.
Only operate the machine while you are in a seat.
The seat belt must be fastened while you operate the machine. Only operate the controls
while the engine is running.
while the engine is running.
While you operate the machine slowly in an open area, check for proper operation of all
controls and all protective devices. Before you move the machine, you must make sure
that no one will be endangered.
controls and all protective devices. Before you move the machine, you must make sure
that no one will be endangered.
Do not allow riders on the machine unless the machine has the following equipment:
l
Additional seat
l
Additional seat belt
l
Rollover Protective Structure (ROPS)
Note any needed repairs during machine operation. Report any needed repairs.
Avoid any conditions that can lead to tipping the machine. The machine can tip when you
work on hills, on banks and on slopes. Also, the machine can tip when you cross ditches,
ridges or other unexpected obstructions.
work on hills, on banks and on slopes. Also, the machine can tip when you cross ditches,
ridges or other unexpected obstructions.