KYOCERA Document Solutions Inc. B5J0451 用户手册
Printing
OPERATION GUIDE
3-3
Connecting to Power
Install the printer close to an AC wall outlet. If an extension cord is used,
the total length of the power cord plus extension should be 5 meters (16
feet) or less.
the total length of the power cord plus extension should be 5 meters (16
feet) or less.
NOTE:
Ensure the printer’s power switch is off. Only use the power cord
supplied with the printer.
1
Connect the power cord to the
Power Cord Connector at the rear
of this printer.
Power Cord Connector at the rear
of this printer.
2
Connect the other end of the power cord to a power outlet.
3
Press the Power Switch to On ( | ).
The printer will begin to warm up.
The printer will begin to warm up.
IMPORTANT: If you install the Toner Container and switch on the power,
four indicators will start rapidly flashing. When the printer is first switched
on after toner installation, there will be a delay of approximately 20 minutes
before the printer is ready to print. Once the Ready indicator lights up,
printer installation is complete.
four indicators will start rapidly flashing. When the printer is first switched
on after toner installation, there will be a delay of approximately 20 minutes
before the printer is ready to print. Once the Ready indicator lights up,
printer installation is complete.
If you turn the power off, you have to wait for an interval of five or more
seconds before turning it back on.