KYOCERA Document Solutions Inc. B5J0451 用户手册

After you connected the machine with a network cable, you can change or 
verify the network settings such as IP address and default gateway using 
KYOCERA COMMAND CENTER (hereinafter referred to as COMMAND 
CENTER). COMMAND CENTER refers to the home page embedded in 
this printer.

If the printer is used on a TCP/IP network and has a valid IP address, it may 
be managed from any web browser. The web browser allows full 
configuration of all printer settings.

When accessing COMMAND CENTER, make sure that:

•

The TCP/IP protocol is installed on the PC to access COMMAND 
CENTER.

•

DHCP server is configured to assign the IP address.

•

The IP address is configured for the printer.

Required operating systems (OS) for using COMMAND CENTER:

•

Microsoft Windows 98SE/Me/2000/XP, Microsoft Windows NT 4.0

•

Apple Macintosh OS X 10.x

COMMAND CENTER has been tested with the following web browsers.

Follow these steps to access to COMMAND CENTER with a web browser 
and change or verify the network settings.

Press [Go] for 3 to 10 seconds to print a status page. For more details, 
refer to Keys on page 1-6.

Run the web browser.

Microsoft Internet Explorer 5.5 and 6.0

Netscape 7.1 or later

Opera 7 or later

Mozilla 1.5 or later

Netscape 7.1 or later

Safari 1 (OS X 10.2 and later)