VTech Telecommunications Ltd 80-0349-00 用户手册
24
"QQFOEJY
24
Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless headset. Try
installing your headset charger as far away as possible from
these types of electronic devices.
phones, can cause interference with your cordless headset. Try
installing your headset charger as far away as possible from
these types of electronic devices.
• You may need to purchase a new battery. Refer to the
#BUUFSZ
JOTUBMMBUJPOsection on page 6 of this user’s manual.
5IFPUIFSQBSUZDBOOPUIFBSNZWPJDFEVSJOHBDBMM
Adjust the speaking volume during a call (page 20).
5IFCBUUFSZEPFTOPUDIBSHF
• Make sure that the battery is securely installed in the
• Make sure that the battery is securely installed in the
cordless headset.
• If the cordless headset is in its headset charger but the
light
on the headset does not turn on, refer to
5IF MJHIUPOUIF
IFBETFUJTPGGXIJMFDIBSHJOH in this 5SPVCMFTIPPUJOH guide.
• Charge the battery in the cordless headset for at least three
hours. For optimum daily performance, return the cordless
headset to the headset charger when not in use.
headset to the headset charger when not in use.
• You may need a new battery. Refer to the
#BUUFSZJOTUBMMBUJPO
section on page 6.
• Your headset might be defective. Refer to the
-JNJUFEXBSSBOUZ
section on pages 40-42 for further instructions.
.ZDPSEMFTTIFBETFUJTOmUQFSGPSNJOHOPSNBMMZ
• Make sure the power cord is securely plugged into the headset
• Make sure the power cord is securely plugged into the headset
charger. Plug the unit into a different, working electrical outlet not
controlled by a wall switch.
controlled by a wall switch.
• Reset the headset. Power off the headset and then power it on
(page 18). Allow up to one minute for the cordless headset and
headset charger to reset.
headset charger to reset.
•
•
5SPVCMFTIPPUJOH