VTech Telecommunications Ltd 80-5744-11 用户手册

下载
页码 46
30
Appendix
I hear other 
calls while 
using my phone
•    Press the CHAN key while on a call to change to a clear channel.
•   Disconnect the base unit from the telephone jack, and plug in a regu-
lar telephone. If you still hear other calls, the problem is probably in 
your wiring or local service. Call your local telephone company.
I hear noise in 
the handset, 
and none of the 
keys or buttons 
work
•   Make sure the power cord is plugged in securely.
Troubleshooting
My handset 
does not ring 
when I receive 
a call
•    Make sure you have the ringer activated. Refer to the section(s) on 
ringer selection in this user’s manual.
•    Make sure the telephone line cord is plugged securely into the base 
unit and the telephone jack. Make sure the power cord is securely 
plugged in.
•   The handset may be too far from the base unit.
•    Charge the battery in the handset for at least 16 hours. For optimum 
daily performance, return the handset to its base when not in use.
•    You may have too many extension phones on your telephone line to 
allow all of them to ring simultaneously. Try unplugging some of the 
other phones.
•    The layout of your home or office might be limiting the operating 
range. Try moving the base to another location, preferably on an 
upper floor.
•    If the other phones in your home are having the same problem, the 
problem is in your wiring or local service. Contact your local tele-
phone company (charges may apply.)
•    Test a working phone at the phone jack. If another phone has the 
same problem, the problem is the phone jack. Contact your local 
telephone company (charges may apply.)
•    Other electronic products can cause interference with your cordless 
phone. Try installing your phone as far away as possible from elec-
tronic devices wireless routers, radios, radio towers, pager towers, 
cell phones, intercoms, room monitors, televisions, personal comput-
ers, kitchen appliances and other cordless phones
•   Your line cord might be malfunctioning. Try installing a new line cord.