Ione RFSCORPIUSQ17U 用户手册
Step2: Choose the version that suits with your language requirement.
Step3: Double-click the icon or execute the .exe file to install the software.
Step4: Select the interface.
Step5: Follow the steps to complete the installation.
Download from www.itron-europe.com:
Step1: Go to “Download – Driver / Manuals”
Step2: Download the version that suits with your operating system
Step3: Extract the .zip-file.
Step4: Navigate to the Folder to which you extracted the zip-file and double-click the
Step3: Double-click the icon or execute the .exe file to install the software.
Step4: Select the interface.
Step5: Follow the steps to complete the installation.
Download from www.itron-europe.com:
Step1: Go to “Download – Driver / Manuals”
Step2: Download the version that suits with your operating system
Step3: Extract the .zip-file.
Step4: Navigate to the Folder to which you extracted the zip-file and double-click the
icon or execute the .exe file to install the software.
Step5: Select the interface.
Step6: Follow the steps to complete the installation.
Note: If you still have problems with this program, please read the “help”-files or contact
Step6: Follow the steps to complete the installation.
Note: If you still have problems with this program, please read the “help”-files or contact
us at
ione@ione.com.tw
or support@itron-europe.com
ID Setup:
The product has been pre-set. Mouse, keyboard and receiver are already paired. It
is not necessary to do the ID setting when you use the mouse and keyboard for the first
time. However, the connection may be lost due to RF interference of environment.
Hence, it may be necessary to re-set the connection-ID. Please follow the process
below for the ID setting.
is not necessary to do the ID setting when you use the mouse and keyboard for the first
time. However, the connection may be lost due to RF interference of environment.
Hence, it may be necessary to re-set the connection-ID. Please follow the process
below for the ID setting.
Mouse:
Step 1: Push the connect button on the back of the wireless Mouse.
Step 2: Press the connect button located on the RF Receiver. This step must be
completed less than 8 seconds after Step 1. Once the Connection indicator
(left side) stops blinking, goes to Step 3.
(left side) stops blinking, goes to Step 3.