Ione RFSCORPIUSQ17U 用户手册
Step 3: When you move the wireless mouse, the Connection indicator will blink. It means
the wireless mouse is connected successfully. If the wireless mouse does not work
properly, please go back to Step 1. (In case, the ID is occupied by another device,
please repeat Step 1 and Step 2 until mouse works properly)
properly, please go back to Step 1. (In case, the ID is occupied by another device,
please repeat Step 1 and Step 2 until mouse works properly)
Keyboard:
Step 4: Press the Connect button located on the back of the wireless keyboard (You may
need a pencil tip or other small tip to press the connect button.)
Step 5: Press the connect button located on the RF Receiver. This step must be completed
less than 8 seconds after Step 4. Once the Connection indicator (left side) stops
blinking, goes to Step 6.
blinking, goes to Step 6.
Step 6: When you press any key of wireless keyboard, the LED of the receiver will blink.
It means the Receiver and the wireless keyboard are connected. If the
wireless keyboard does not work properly, please go back to Step 4. (In case, the
ID is occupied by other devices, please repeat Step 4 and Step 5
until keyboard works properly.)
wireless keyboard does not work properly, please go back to Step 4. (In case, the
ID is occupied by other devices, please repeat Step 4 and Step 5
until keyboard works properly.)
Hot Key Function Description:
1. Mouse
1. Left Click
2. Right Click
3. Scroll Wheel Button
4. Previous-Page
5. Next-Page
6. Scroll Up
7. Scroll Down
8. Application Switch
1. Left Click
2. Right Click
3. Scroll Wheel Button
4. Previous-Page
5. Next-Page
6. Scroll Up
7. Scroll Down
8. Application Switch