TransCore 0596465PT90 用户手册
Encompass 4 Reader System Guide
3-20
Figure 3-20 Upper Center Interior Windshield Tag Location
ATA Interior Tag Installation Procedures
Perform the following steps to install interior tags:
1.
1.
Clean the tag installation area on the interior surface of the windshield with
rubbing alcohol.
rubbing alcohol.
2.
Dry the area thoroughly using a clean, dry cloth.
3.
Remove the clear backing from the two strips of hook-and-loop material on the
back of the tag (
back of the tag (
) or from the double-sided tape.
Figure 3-21 Hook-and-Loop Material on Interior Tag