Wulfsberg Electronics Division 2000-800 用户手册
P-2000/C-2000/RT-2000
Operator’s Manual
Page 12 of 39
Publication No. 150-049105
P-2000 Operators Manual
Rev. A
Oct 2003
Selecting the Active Transceiver
To make FM1 or FM2 the “active transceiver” means that the keypad/rotary knobs will perform operations on that
transceiver. The active transceiver is always highlighted in a bright blue color. As shown in the picture below, FM1
is the active transceiver.
transceiver. The active transceiver is always highlighted in a bright blue color. As shown in the picture below, FM1
is the active transceiver.
To make FM1 the active transceiver push the FM #1 SELECT BUTTON as shown above. Pushing the FM #2 select
button will make FM2 the active transceiver and the blue highlight will be moved to the FM2 area of the display as
shown below.
button will make FM2 the active transceiver and the blue highlight will be moved to the FM2 area of the display as
shown below.
When the P-2000 operating in MODE 1 (only one headset shared between two transceivers), the active transceiver is
the one that will be used for transmitting. In mode 1, the transceivers (FM1 and FM2) will have their receive audio
summed together and sent to the headset. The operator must chose which transceiver will be used when they want
to transmit.
the one that will be used for transmitting. In mode 1, the transceivers (FM1 and FM2) will have their receive audio
summed together and sent to the headset. The operator must chose which transceiver will be used when they want
to transmit.
FM #2 Select
FM #1 Select