Wulfsberg Electronics Division 2000-UHF1 用户手册
Wulfsberg Electronics
P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A
Page 5 of 37
Basic Operations
Front Panel & Controls
DISPLAY
The P-2000 has a color LCD display. It provides the visual feedback for the system. Exactly what is displayed
depends on the current operating mode of the P-2000. During normal operation, the top area shows information for
FM #1 and the bottom line shows information for FM #2.
depends on the current operating mode of the P-2000. During normal operation, the top area shows information for
FM #1 and the bottom line shows information for FM #2.
The keypad and select/tune rotary knobs perform functions on the transceiver that is highlighted in blue. The blue
highlight also indicates which transceiver has been selected for transmitting when the system is operating in MODE
1. This is the mode in which only one audio panel position being shared between the two transceivers.
highlight also indicates which transceiver has been selected for transmitting when the system is operating in MODE
1. This is the mode in which only one audio panel position being shared between the two transceivers.
FM #1 SELECT – This button selects FM #1 as the
active transceiver. This is depicted on the display by
the FM1 area turning a bright blue color. The keypad
and select/Tune Knobs will now operate exclusively
on the FM1 transceiver.
active transceiver. This is depicted on the display by
the FM1 area turning a bright blue color. The keypad
and select/Tune Knobs will now operate exclusively
on the FM1 transceiver.
FM #2 SELECT - This button selects FM #2 as the
active transceiver. This is depicted on the display by
the FM2 area turning a bright blue color. The keypad
and select/Tune Knobs will now operate exclusively
on the FM2 transceiver.
active transceiver. This is depicted on the display by
the FM2 area turning a bright blue color. The keypad
and select/Tune Knobs will now operate exclusively
on the FM2 transceiver.
FM #1 TRANSFER – The button will transfer
(flip-flop) the active and standby channels for FM1.
(flip-flop) the active and standby channels for FM1.
FM #2 TRANSFER – This button will transfer
(flip-flop) the active and standby channels for FM2.
(flip-flop) the active and standby channels for FM2.
FM #1 VOLUME KNOB – This rotary switch is
used to control the volume of FM #1. Pressing the
button will perform a “Test” of the audio system by
allowing audio from that transceiver to be sent to the
headset. This is used to vary volume levels of that
transceiver.
used to control the volume of FM #1. Pressing the
button will perform a “Test” of the audio system by
allowing audio from that transceiver to be sent to the
headset. This is used to vary volume levels of that
transceiver.
FM #2 VOLUME KNOB – This rotary switch is
used to control the volume of FM #2. Pressing the
button will perform a “Test” of the audio system by
allowing audio from that transceiver to be sent to the
headset. This is used to vary volume levels of that
transceiver.
used to control the volume of FM #2. Pressing the
button will perform a “Test” of the audio system by
allowing audio from that transceiver to be sent to the
headset. This is used to vary volume levels of that
transceiver.
SELECT KNOB – This rotary switch is used to
move the cursor around the display.
move the cursor around the display.
TUNE KNOB – This rotary switch is used to modify
values at the cursor position.
values at the cursor position.
ENTER/PWR button – Pushing the TUNE KNOB
(small rotary knob) button performs both “Enter” and
power on/off operations.
(small rotary knob) button performs both “Enter” and
power on/off operations.
DATA PORT – This connector is used to transfer
data between the P-2000 and Encrytion Keyloaders
or for loading preset channel information via the
Motorola CPS (PC based) software.
data between the P-2000 and Encrytion Keyloaders
or for loading preset channel information via the
Motorola CPS (PC based) software.
FM #1 Select
FM #2 Select
FM #1 Volume
FM #2 Volume
Data Port
Cursor Knob
Keypad
FM #1 Transfer
FM #2 Transfer
Value Knob &
Enter/Power
Button
Enter/Power
Button