Wulfsberg Electronics Division 2000-UHF1 用户手册
Wulfsberg Electronics
P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A
Page 8 of 37
FM1
M
TX
RX
DIR
PVT
SCAN
Discreet Indicators – The following discreet indicators apply to both FM1 and FM2.
This helps the user know the information in this block is for the transceiver located in FM #1 Position.
This indicates that the audio for that transceiver has been turned muted. To un-mute the audio, change
the volume on that radio to something other than “0”.
the volume on that radio to something other than “0”.
This indicates the transceiver is in the transmit mode.
This indicates the transceiver is receiving a signal.
This indicates the transceiver has been put into DIRECT mode. Direct mode is also called “Talk-
around”, “Car-to-Car”, or “Simplex”.
around”, “Car-to-Car”, or “Simplex”.
This indicates the transceiver has been put into Private mode and will use the encryption system
embedded in the transceiver. This mode is not available if a channel is not programmed for encryption.
embedded in the transceiver. This mode is not available if a channel is not programmed for encryption.
This indicates the transceiver has been put into Scan mode.
You can always get back to the HOME PAGE by pressing the HOME
button one or more times.
button one or more times.
ACTIVE Channel
STANDBY Channel
FM 1 Discreet Indicators
Channel Alpha Identifier