Wulfsberg Electronics Division CVC-151 用户手册
FLITELINE AVIONICS SYSTEM
PILOT’S GUIDE
Publication No. 150-047012
Page 11
Rev. D
Dec 2005
CVC-152 Controls (Series III, FliteLine, and ARINC 410 Interfaces Continued…)
ACT
1
25k
TST
8.33k
124.950
Active Frequency
The upper line of the display always shows
the active frequency
the active frequency
…
124.950
ACT
1
25k
TST
8.33k
124.950
Active Annunciator
…which is indicated by the Active
Annunciator (the letters ACT).
Annunciator (the letters ACT).
124.950
ACT
1
25k
TST
8.33k
124.950
Standby Frequency
The lower line of the display shows the
standby frequency.
standby frequency.
When both frequencies are shown, rotating
the FREQUENCY KNOBS changes the
standby frequency.
the FREQUENCY KNOBS changes the
standby frequency.
124.950
ACT
1
25k
TST
8.33k
124.950
TX
Transmit Annunciator
The Transmit Annunciator (the letters Tx)
indicates an RF output of the transmitter. It
appears when the microphone is keyed.
indicates an RF output of the transmitter. It
appears when the microphone is keyed.
*Note:Tx Indicator not present on units
configured for ARINC 410 interface
configured for ARINC 410 interface