Wulfsberg Electronics Division CVC-151 用户手册
FLITELINE AVIONICS SYSTEM
PILOT’S GUIDE
Page 12
Publication No. 150-047012
Dec 2005
Rev. D
CVC-152 Controls (Series III, FliteLine, and ARINC 410 Interfaces Continued…)
124.950
ACT
1
25k
TST
8.33k
124.950
TX
System Number
The System Number indicates that this
display is for COM System 2 (when more
than one system is installed). The number
1 indicates that this display is for COM
System 1 (when more than one system is
installed).
display is for COM System 2 (when more
than one system is installed). The number
1 indicates that this display is for COM
System 1 (when more than one system is
installed).
If only one COM System is installed or if
this Control Display Unit controls COM 3 in
a three-radio system, the display shows a
blank instead of 1 or 2.
this Control Display Unit controls COM 3 in
a three-radio system, the display shows a
blank instead of 1 or 2.
CVC-152 Display (Series III and FliteLine Interface – Failure Indication)
FAIL 1
ACT
1
25k
TST
8.33k
124.950
* Series III Interface (FliteLine Radio
installations may display these pages
when configured as Series III)
installations may display these pages
when configured as Series III)
FAIL 1 in the lower line of the display
indicates a System failure. Neither
transmitter nor receiver is operative.
indicates a System failure. Neither
transmitter nor receiver is operative.
FAIL 2
ACT
1
25k
TST
8.33k
124.950
* Series III Interface (FliteLine Radio
installations may display these pages
when configured as Series III)
installations may display these pages
when configured as Series III)
FAIL 2 in the lower line of the display
indicates a Transmitter only failure. This is
displayed only when the microphone is
keyed. The receiver is still operative
unless FAIL 1 is displayed with the
microphone not keyed.
indicates a Transmitter only failure. This is
displayed only when the microphone is
keyed. The receiver is still operative
unless FAIL 1 is displayed with the
microphone not keyed.