Tekk XT100 用户手册

Radio will stop for a programmed delay time and start scanning 
on priority scan option activity channel. 

 

- Look back (Receiving correct call in Priority scan mode) 

        Any channel, when not in the scan mode can be programmed to 

“look back” at the priority channel. This feature is ideal for those 
who do not need scan as defined above, but want to make sure 
that they never miss a call on the “priority” channel if another 
channel has been selected, the radio will periodically  “look 
back” at the Priority channel. If activity is detected on the 
“priority” channel, the radio will move to that channel for as long 
as it remains active.  
 

- Priority Scan TX : If a coming signal is not correct call, allow 

transmission on the normal channel. If a coming signal is a correct 
call, allow transmission on the correct call channel. After finish 
transmission, resume scan after scan delay time. 

 

- Muti Scan : if press Scan key while Priority scan mode is On, 
Priority Channel 
  scan and Normal scan will take place at the same time under this 
condition,   
  scan sequence will be as below. 

N-Ch(1) ===?  P-Ch ==?  N-Ch(2)===?  P-Ch ===?  N-Ch(3)…… 

 
 
 
 
 

4.  TX operation 

1) PTT TX 

Allows transmission with pressing PTT. 

         

2) To enable VOX function, first of all VOX function and its level 

must be set through PC programmer and then turn Radio ` 

on while pressing PTT. At a moment, radio makes beep sound. 
3) TOT (TX Time-out-Timer) 

This function will be disable TX.