Digital Monitoring Products Inc PC0181 用户手册
XTLplus Installation and Programming Guide
Digital Monitoring Products
25
SYSTEM OPTIONS
28.12
Arm Activity Days
This allows selection of the number of days a countdown timer is set for area
arming and disarming activity. The range for the countdown timer is 00 to 99.
When the timer counts down to zero because of no arming or disarming activity,
the panel sends a “No Arming/Disarming” message to the receiver at 10:00
AM. Each time an area is armed or disarmed, the timer is restarted. When the
countdown timer expires because of no arming or disarming activity, and a
message is sent, the timer does not restart until a panel reset occurs or an area is
armed or disarmed.
The SUPV/TRBL receiver option must be selected in communication programming
for the message to be sent.
28.13
Time Zone Changes
This option allows the panel to request automatic time changes from the DMP SCS-
1R Receiver. For the receiver to send time changes, it must be programmed to send
time changes and must be receiving time change updates from the host automation
computer at least every 24 hours. Default is YES.
When time zone is programmed YES, enter the number (0-23) that indicates the
Greenwich Time zone (GMT) where the panel is located. The default is 6. See table
for GMT values.
GMT
City/Time Zone
GMT
City/Time Zone
0
London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh
13
New Cadelonia
1
Cape Verde Island, Azores
14
Guam, Sydney
2
Mid-Atlantic, Fernando de Noronha
15
Tokyo, Seoul
3
Buenos Aires, Georgetown, Brasilia, Rio de Janeiro
16
Hong Kong, Singapore
4
Atlantic Time (Canada), Caracas, La Paz, Santiago
17
Bangkok, Hanoi
5
Eastern Time (US, Canada) Bogota, Lima, Arequipa
18
Dhaka, Almaty
6
Central Time (US, Canada), Mexico City, Saskatchewan
19
Islamabad, Karachi
7
Mountain Time (US, Canada), Edmonton
20
Abu Dhabi, Kazan
8
Pacific Time (US, Canada), Tijuana
21
Moscow, Bagdad
9
Alaska
22
Eastern Europe
10
Hawaii
23
Rome, Paris, Berlin
11
Midway Island, Samoa
12
Fiji, Marshall Island, Wellington, Auckland, Kwajalein, Kamchatka
28.14
Time Display
YES allows the keypad to display the time and day in the Status List. When NO is
selected, time and day of the week are not displayed.
28.15
House Code
A Wireless House Code between 1 and 50 is pre-programmed at the factory. To
change the house code, press any select key. Enter a House Code from 1 to 50 and
press the CMD button. The XTLplus automatically programs the house code into the
wireless transmitters when the unique transmitter serial number is programmed
into the panel. See Wireless programming in Zone Information. The house code
identifies the panel, receiver, and transmitters to each other. When operating,
the receiver listens for transmissions that have the programmed house code and
transmitter serial number.
28.15.1
Detect Wireless Jamming
When enabled and the receiver detects jamming, a trouble or alarm message is
sent to the receiver and displays in the Status List. Select YES to enable jamming
messages to display in the Status List. Select NO to disable jamming messages.
Default is NO.
28.15.2
Wireless Audible Annunciation
Press any top row key to select the keypad buzzer annunciation method for
wireless low battery and missing messages.
Select ANY to enable annunciation anytime.
Select DAY to enable annunciation except during sleeping hours (9 PM to 9 AM).
Select MIN (minimum) to annunciate only Fire zones during daytime hours (9 AM to
9 PM). Default is DAY.
ARM ACTY DAYS:
0
TIME CHG NO YES
HRS FROM GMT:
6
TIME DSP NO YES
HOUSE CODE: -
DET JAMNG NO YES
WLS AUDIBLE: DAY
ANY DAY MIN