Digital Monitoring Products Inc PC0181 User Manual

This allows selection of the number of days a countdown timer is set for area 

arming and disarming activity. The range for the countdown timer is 00 to 99. 

When the timer counts down to zero because of no arming or disarming activity, 

the panel sends a “No Arming/Disarming” message to the receiver at 10:00 

AM. Each time an area is armed or disarmed, the timer is restarted. When the 

countdown timer expires because of no arming or disarming activity, and a 

message is sent, the timer does not restart until a panel reset occurs or an area is 

armed or disarmed. 

The SUPV/TRBL receiver option must be selected in communication programming 

for the message to be sent.

This option allows the panel to request automatic time changes from the DMP SCS-

1R Receiver. For the receiver to send time changes, it must be programmed to send 

time changes and must be receiving time change updates from the host automation 

computer at least every 24 hours. Default is YES.

When time zone is programmed YES, enter the number (0-23) that indicates the 

Greenwich Time zone (GMT) where the panel is located. The default is 6. See table 

for GMT values.

0

London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh

13

New Cadelonia

1

Cape Verde Island, Azores

14

Guam, Sydney

2

Mid-Atlantic, Fernando de Noronha

15

Tokyo, Seoul

3

Buenos Aires, Georgetown, Brasilia, Rio de Janeiro

16

Hong Kong, Singapore

4

Atlantic Time (Canada), Caracas, La Paz, Santiago

17

Bangkok, Hanoi

5

Eastern Time (US, Canada) Bogota, Lima, Arequipa

18

Dhaka, Almaty

6

Central Time (US, Canada), Mexico City, Saskatchewan

19

Islamabad, Karachi

7

Mountain Time (US, Canada), Edmonton

20

Abu Dhabi, Kazan

8

Pacific Time (US, Canada), Tijuana

21

Moscow, Bagdad

9

Alaska

22

Eastern Europe

10

Hawaii

23

Rome, Paris, Berlin

11

Midway Island, Samoa

12

Fiji, Marshall Island, Wellington, Auckland, Kwajalein, Kamchatka

YES allows the keypad to display the time and day in the Status List. When NO is 

selected, time and day of the week are not displayed.

A Wireless House Code between 1 and 50 is pre-programmed at the factory. To 

change the house code, press any select key. Enter a House Code from 1 to 50 and 

press the CMD button. The XTLplus automatically programs the house code into the 

wireless transmitters when the unique transmitter serial number is programmed 

into the panel. See Wireless programming in Zone Information. The house code 

identifies the panel, receiver, and transmitters to each other. When operating, 

the receiver listens for transmissions that have the programmed house code and 

transmitter serial number.

When enabled and the receiver detects jamming, a trouble or alarm message is 

sent to the receiver and displays in the Status List. Select YES to enable jamming 

messages to display in the Status List. Select NO to disable jamming messages. 

Default is NO.

Press any top row key to select the keypad buzzer annunciation method for 

wireless low battery and missing messages.

Select ANY to enable annunciation anytime.

Select DAY to enable annunciation except during sleeping hours (9 PM to 9 AM).

Select MIN (minimum) to annunciate only Fire zones during daytime hours (9 AM to 

9 PM). Default is DAY.

ARM ACTY DAYS:

TIME CHG  NO  YES

HRS FROM GMT:

TIME DSP  NO  YES

HOUSE CODE:   -

DET JAMNG NO YES

 

WLS     AUDIBLE: DAY

 

ANY DAY MIN