3Com Corporation SRWL-306 用户手册

2222

IIII

NSTALLING

THE

CCESS

PPPP

OINT

Before You Begin

The following items are required for installation:

■

3Com Integrated Power-over-Ethernet power supply and power cord.

■

Standard category 5 straight (8-wire) Ethernet cable for connecting the access

point to the power supply. This length of cable must reach from the access

point to the power supply.
If you plan to connect the access point to a wired network, you will need an

additional length of Ethernet cable.

■

If you plan to mount the access point on a wall:

■

Mounting template

■

Wall mount hardware kit

■

If you plan to mount the access point to the T-rail grid of an acoustical ceiling:

■

Mounting bracket

■

Two #6 panhead screws

After hardware installation is complete:

■

Install the access point tools, utilities, and user guide from the installation CD.

■

Review the default system settings and ensure they are suitable for your site.

■

If required, use the administrative utilities to change configuration parameters.

See Using the Configuration Management System on page21.

For the latest networking information, see the 3Com Corporation World Wide

Web at:

http://www.3com.com/

For advanced installations, we recommend that you conduct a site survey before

permanently installing the access point. A site survey tool is provided on the

3Com Administrator Utilities CD. To conduct the survey, you must also use the

administrator utilities to set up a wireless client. See Conducting a Site Survey

CAUTION: Only professional network personnel should install the access point,

cables, and antennas.