Sony Corporation HWSAV10T 用户手册
11
US
To avoid the electromagnetic interference
2.4 GHz range
wireless equipment
2.4 GHz range
wireless equipment
Bluetooth
R
equipment
Wireless LAN
system
Cordless phone
Wireless LAN
system
Cordless phone
HWS-AV10K
If this unit or other equipment does not work correctly
Try one or both of the following procedures.
1
Change the frequency (CHANNEL switch) to another frequency.
CHANNEL
You can avoid conflicts between this unit and other equipment by changing the CHANNEL
switch on the rear of this unit. See the table at above for the frequency settings.
switch on the rear of this unit. See the table at above for the frequency settings.
Important
Make sure to set the CHANNEL switch of the transmitter and receiver to the same position.
2
Move this unit away from other equipment.
When you are using this unit close to other equipment, electromagnetic interference may
occur. Move this unit away from other equipment.
occur. Move this unit away from other equipment.
Improving reception
Channel 1 : 2.415 GHz
Channel 2 : 2.429 GHz
Channel 3 : 2.443 GHz
Channel 4 : 2.457 GHz
Channel 2 : 2.429 GHz
Channel 3 : 2.443 GHz
Channel 4 : 2.457 GHz
This unit uses a 2.4 GHz frequency
range. This is the same frequency
range used by a cordless phone,
wireless LAN, Bluetooth equipment,
microwave oven or other wireless
equipment. If you use this unit
together such equipment, malfunction
may result.
range. This is the same frequency
range used by a cordless phone,
wireless LAN, Bluetooth equipment,
microwave oven or other wireless
equipment. If you use this unit
together such equipment, malfunction
may result.