PLANTRONICS INC CSEB01 用户手册
Ajuste
del auricular y carga
con el cable USB
Ajuste el auricular
Reemplace el tapón para un mejor ajuste.
1
Presione la almohadilla hacia adentro y gírela hacia la izquierda para
desbloquearla.
desbloquearla.
2
Alinee una nueva almohadilla en la ranura.
3
Presione la almohadita hacia adentro y gírela hacia la derecha para
hasta que encaje en su lugar.
hasta que encaje en su lugar.
Para llevar el auricular en el otro oído, rote el brazo hacia arriba y luego
gírelo alrededor, así la almohadita estará en el otro lado antes de bajar
el brazo
gírelo alrededor, así la almohadita estará en el otro lado antes de bajar
el brazo
2
1
3
Carga del auricular con cable USB
1
Alinee las zonas magnéticas de ajuste del auricular y del dispositivo de
carga.
carga.
2
Conecte el dispositivo de carga al cargador de pared USB o a la
computadora portátil por 90 minutos. Las luces LED se apagan una vez
completada la carga
computadora portátil por 90 minutos. Las luces LED se apagan una vez
completada la carga
Accesorios de carga opcionales
Para obtener información sobre otras opciones de carga, visite
plantronics.com/accessories y busque:
plantronics.com/accessories y busque:
• Estuche para carga Voyager Legend
• Soporte de carga Voyager Legend
• Cargador para automóviles Voyager Legend
• Soporte de carga Voyager Legend
• Cargador para automóviles Voyager Legend
Emparejar teléfono celular
y llamada
y llamada
Empareje su teléfono celular
1
Encienda su auricular y luego seleccione:
• Toque el botón Voz
y diga “modo de emparejamiento”, o bien,
• Mantenga presionado el botón de llamada
hasta que escuche
"emparejamiento".
2
Mientras las luces LED del auricular parpadean en rojo y azul, active
Bluetooth® en su teléfono y configúrelo para buscar nuevos dispositivos.
Bluetooth® en su teléfono y configúrelo para buscar nuevos dispositivos.
3
Seleccione “PLT_Legend”.
PLT_Legend
4
Si su teléfono celular le solicita ingresar una contraseña, ingrese 0000.
Una vez que se hayan emparejado correctamente, las luces LED dejan
de parpadear en rojo y azul y se escucha "emparejado exitoso". Algunos
teléfonos pueden solicitarle permitir el acceso a los contactos para
habilitar anuncios con el nombre del interlocutor.
Una vez que se hayan emparejado correctamente, las luces LED dejan
de parpadear en rojo y azul y se escucha "emparejado exitoso". Algunos
teléfonos pueden solicitarle permitir el acceso a los contactos para
habilitar anuncios con el nombre del interlocutor.
PLT_Legend
5
Haga una llamada de prueba desde su teléfono celular.
6
Finalice la llamada presionando el botón de llamada
. La llamada no
finaliza cuando se quita el auricular.
Empareje otro teléfono
Luego de emparejar su auricular con su teléfono, usted podría querer
emparejar otro teléfono.
emparejar otro teléfono.
1
Encienda su auricular y luego seleccione:
• Toque el botón Voz
y diga “modo de emparejamiento”, o bien,
• Mantenga presionado el botón de llamada
hasta escuchar
“emparejamiento”.
2
Mientras las luces LED del auricular parpadean en rojo y azul, active
Bluetooth® en su teléfono y configúrelo para buscar nuevos dispositivos.
Bluetooth® en su teléfono y configúrelo para buscar nuevos dispositivos.
3
Seleccione “PLT_Legend”.
4
Una vez que se hayan emparejado correctamente, las luces LED dejan de
parpadear en rojo y azul y se escucha "Emparejamiento correcto”.
parpadear en rojo y azul y se escucha "Emparejamiento correcto”.
NOTA
Algunos teléfonos pueden solicitarle permitir el acceso a los
contactos para habilitar anuncios con el nombre del interlocutor.
Responder una llamada del teléfono de escritorio mientras está
en una llamada móvil
Presione el botón de llamada una vez para finalizar la llamada en el
teléfono móvil y luego presiónelo nuevamente para responder la llamada
del teléfono de escritorio.
teléfono móvil y luego presiónelo nuevamente para responder la llamada
del teléfono de escritorio.
NOTA
Siga el mismo procedimiento cuando responde una llamada móvil
mientras está en una llamada del teléfono de escritorio.
GUÍA DE INICIO RÁPIDO
Sistema del auricular Voyager
Legend CS Bluetooth
Diseñado en Santa Cruz, California
Utilice y reinicie
Smart Sensors
Smart Sensors
™
Uso de los sensores
Smart Sensors reaccionan cuando se pone o se quita los auriculares.
Al colocarse el auricular podrá:
Al colocarse el auricular podrá:
• Contestar una llamada entrante
• Transferir una llamada activa desde su teléfono (Disponible sólo con su
• Transferir una llamada activa desde su teléfono (Disponible sólo con su
teléfono móvil)
• Reanudar la transmisión de audio
Al sacarse el auricular podrá:
• Transferir una llamada activa hacia su auricular (Disponible sólo con su
teléfono móvil)
• Pausar la transmisión de audio
• Bloquear el botón de Llamada para prevenir llamadas accidentales
• Bloquear el botón de Llamada para prevenir llamadas accidentales
Probar comandos de voz
Presione el botón Voz
espere que le solicite un comando, luego
diga el comando. Por ejemplo, “¿Qué puedo decir?” le indicará toda la
lista de comandos disponibles.
lista de comandos disponibles.
Reinicio de sensores
Podría tener que reiniciar los sensores si estos no están funcionando
correctamente.
Con el auricular puesto, presione el botón de Llamada para probar los
sensores:
correctamente.
Con el auricular puesto, presione el botón de Llamada para probar los
sensores:
• La alerta de voz del tiempo de conversación le indica que los sensores
funcionan
• El sonido de tono significa que debe reiniciar los sensores
Para restablecer los sensores, cargue el auricular y colóquelo en una
superficie lisa no-metálica durante más de 10 segundos.
superficie lisa no-metálica durante más de 10 segundos.
3
voice
2
Contestar una llamada
, seleccione:
• Póngase el auricular para contestar la
llamada, o
• Presione el botón de llamadas
, o bien
• Diga “contestar” luego de que se anuncia la
llamada. (Disponible solo con su teléfono
celular)
celular)
Terminar una llamada
Presione el botón Llamada
para finali-
zar la llamada actual.
Discado por voz (función del teléfono móvil)
Presione el botón de llamada
durante 2
segundos, espere la indicación del teléfono,
y luego indíquele al teléfono que marque el
nombre de un contacto almacenado.
y luego indíquele al teléfono que marque el
nombre de un contacto almacenado.
Silenciar el micrófono durante una llamada
Presione el botón de Silencio . Escuchará
la confirmación “mute on” (activación del
silencio). Una alerta se repite cada 15 minu-
tos a modo de recordatorio. Vuelva a tocar
el botón de silencio para abrir el micrófono
y escuchar la confirmación “mute off”
(silencio desactivado).
silencio). Una alerta se repite cada 15 minu-
tos a modo de recordatorio. Vuelva a tocar
el botón de silencio para abrir el micrófono
y escuchar la confirmación “mute off”
(silencio desactivado).
Ajustar el volumen
Alterne el botón de volumen
hacia
arriba (+) o hacia abajo (-) durante una
llamada o mientras se realiza una transfer-
encia de audio.
llamada o mientras se realiza una transfer-
encia de audio.
4
¿NECESITA MÁS AYUDA?
Soporte técnico
plantronics.com/support
Guía del usuario en línea
http://docs.plantronics.com/VoyagerLegendCS
1
Cargar, conectar y realizar una
llamada desde el teléfono de
llamada desde el teléfono de
escritorio
Carga del auricular
1
Enchufe un extremo del suministro eléctrico en el conector hembra en la
parte trasera de la base y el otro extremo en la salida del tomacorriente
que está funcionando.
parte trasera de la base y el otro extremo en la salida del tomacorriente
que está funcionando.
2
Para cargar, coloque el auricular en la base durante 20 minutos como
mínimo.
mínimo.
Cómo conectar el teléfono de escritorio
Conecte los cables del teléfono de escritorio a la base.
Hacer una llamada con el teléfono de escritorio
1
Con el auricular puesto, presione el botón de control de llamadas.
2
Levante el tubo del teléfono de escritorio.
NOTA
Para la función de control de llamadas remotas (dispositivo para
descolgar el teléfono HL10 o cable EHS),
consulte
www.plantronics.com/
accessories
.
3
Marque llamada de prueba desde el teléfono de escritorio.
4
Para finalizar la llamada, presione el botón de control de llamadas de los
auriculares y cuelgue el tubo.
Consejo para la resolución de problemas: Si no escucha un tono de
marcar, ajuste el conmutador deslizante (A–G) hasta que lo haga. El
ajuste preconfigurado A funciona para la mayoría de los teléfonos de
escritorio.
auriculares y cuelgue el tubo.
Consejo para la resolución de problemas: Si no escucha un tono de
marcar, ajuste el conmutador deslizante (A–G) hasta que lo haga. El
ajuste preconfigurado A funciona para la mayoría de los teléfonos de
escritorio.
=
20
Consulte las instrucciones de seguridad por separado para obtener
información importante sobre la seguridad del producto antes de
instalarlo o utilizarlo.
El sistema de auricular Voyager Legend CS consiste en una base del
auricular CSEB-01 y un auricular Voyager Leyend Bluetooth.
información importante sobre la seguridad del producto antes de
instalarlo o utilizarlo.
El sistema de auricular Voyager Legend CS consiste en una base del
auricular CSEB-01 y un auricular Voyager Leyend Bluetooth.
1 Estado de la llamada
• Inactivo = sin luz
• Llamada entrante = parpadea rápidamente
• Llamada entrante = parpadea rápidamente
una luz azul
• En llamada = luz azul fija
• Llamada en silencio (mic del auricular) =
• Llamada en silencio (mic del auricular) =
parpadea lentamente una luz azul
2 LED de encendido
• Apagado = sin luz
• Encendido = luz azul fija
• En modo de emparejamiento = parpadea
• Encendido = luz azul fija
• En modo de emparejamiento = parpadea
luz roja/azul
• Emparejamiento exitoso = luz azul fija
3 LED de batería del auricular (cuando está
en la base)
en la base)
• Batería completa, se detuvo la carga = luz
azul fija
• Alta, Cargando = 3 luces azules que par-
padean cada 10 segundos
• Media, Cargando = 2 luces azules que
parpadean cada 10 segundos
• Baja, Cargando = 2 luces rojas que par-
padean cada 10 segundos
• Muy baja, Cargando = 3 luces rojas que
parpadean cada 10 segundos
1
2
3
Fit
Headset and Charge with
USB Cable
Fit your headset
Replace the eartip for a better fit.
1
Push in eartip and rotate to the left to unlock it.
2
Align new eartip into slot.
3
Push in eartip and rotate to the right to lock it into place.
To wear the headset on your other ear, rotate the boom upwards then
twist it around so eartip is on other side before lowering boom.
twist it around so eartip is on other side before lowering boom.
2
1
3
Charge Headset with USB Cable
1
Align snap-fit magnetic areas of headset and charging device.
2
Attach charging device to USB wall charger or laptop for 90 minutes.
LEDs turn off once fully charged.
LEDs turn off once fully charged.
Optional Charging Accessories
For more charging options go to plantronics.com/accessories and look
for:
for:
• Voyager Legend Charger Case
• Voyager Legend Charger Stand
• Voyager Legend Car Charger
• Voyager Legend Charger Stand
• Voyager Legend Car Charger
Pair Mobile Phone and Call
Pair your mobile phone
1
Power on your headset then choose:
• Tap the Voice button
and say “Pair mode,” or
• Press and hold the Call button
until you hear “Pairing”.
2
While the headset LEDs are flashing red and blue, activate Bluetooth® on
your phone and set it to search for new devices.
your phone and set it to search for new devices.
3
Select “PLT_Legend”.
PLT_Legend
4
If prompted by your mobile phone for a passcode enter 0000. Once
successfully paired, LEDs stop flashing red and blue and you hear
“pairing successful”. Some phones may prompt you to allow access to
contacts to enable caller name announcement.
successfully paired, LEDs stop flashing red and blue and you hear
“pairing successful”. Some phones may prompt you to allow access to
contacts to enable caller name announcement.
PLT_Legend
5
Make a test call from your mobile phone.
6
End the call by pressing the call button
. The call does not end when
you remove your headset.
Pair another phone
After pairing your headset to your phone you may want to pair another
or new phone.
or new phone.
1
Power on your headset then choose:
• Tap the Voice button
and say “Pair mode,” or
• Press and hold the Call button
until you hear “Pairing”
2
While the headset LEDs are flashing red and blue, activate Bluetooth® on
your phone and set it to search for new devices.
your phone and set it to search for new devices.
3
Select “PLT_Legend.”
4
Once successfully paired, LEDs stop flashing red and blue and you hear
“pairing successful.”
“pairing successful.”
NOTE
Some phones may prompt you to allow access to contacts to enable
caller name announcement.
Answering a desk phone call while on a mobile call
Tap the Call button once to end the mobile phone call then press again
to answer your desk phone call.
to answer your desk phone call.
NOTE
Use the same procedure when answering a mobile call while on a
desk phone call.
QUICK START GUIDE
Voyager Legend CS
Bluetooth Headset System
Designed in Santa Cruz, California
Use and Reset Smart Sensors
™
Use sensors
Smart Sensors react when you put on or take off your headset.
Putting on your headset will:
Putting on your headset will:
• Answer an incoming call
• Transfer an active call from your phone (Available only with your mobile
• Transfer an active call from your phone (Available only with your mobile
phone)
• Resume streaming audio
Taking off your headset will:
• Transfer an active call to your phone handset (Available only with your
mobile phone)
• Pause streaming audio
• Lock the Call button to prevent accidental calls
• Lock the Call button to prevent accidental calls
Try voice commands
Tap the Voice button
wait for command request, then say a
command. For example, “What can I say?” tells you the full list of
available commands.
available commands.
Reset sensors
You may need to reset the sensors if they are not working as expected.
Wearing the headset, tap the Call button to test sensors:
Wearing the headset, tap the Call button to test sensors:
• Talk time voice alert means sensors are working
• A tone means sensors need to be reset
• A tone means sensors need to be reset
To reset the sensors, charge your headset and place on a flat non-
metallic surface for more than 10 seconds.
metallic surface for more than 10 seconds.
3
voice
2
Answer a call
, choose:
• Put on the headset to answer call, or
• Tap the Call button
• Tap the Call button
or
• Say “answer” after call is announced.
(Available only with your mobile
phone)
phone)
End a call
Tap the Call button
to endcurrent
call.
Voice dial (mobile phone feature)
Press the Call button
for 2
seconds, wait for phone prompt and
then tell the phone to dial the name
of a stored contact.
of a stored contact.
Mute the microphone during a call
Tap the Mute button . You will hear
“mute on” confirmation.An alert re-
peats every 15 minutes as a reminder.
Tap the Mute button again to open
the microphone and hear “mute off”
confirmation.
peats every 15 minutes as a reminder.
Tap the Mute button again to open
the microphone and hear “mute off”
confirmation.
Adjust the volume
Toggle the Volume button
up (+)
or down (–) during a call or while
streaming audio.
streaming audio.
4
© 2013 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Voyager Legend,
QuickPair, are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark
and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is
under license. All other trademarks are the property of their respective owners. Patents Pending
QuickPair, are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark
and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is
under license. All other trademarks are the property of their respective owners. Patents Pending
89650-01 (07.13)
1
Charge, Connect, and Call from
Desk Phone
Desk Phone
Charge your headset
1
Plug one end of power supply into power jack on back of the base and
other end into working power outlet.
other end into working power outlet.
2
To charge, dock headset in base for minimum of 20 minutes.
Connect Desk Phone
Connect cables from desk phone to base.
Make Desk Phone Call
1
While wearing headset, press call control button.
2
Remove the desk phone handset.
NOTE
For remote call control capability (HL10 lifter or EHS cable),
see
plantronics.com/accessories
.
3
Dial test call from desk phone.
4
End call by pressing headset call control button and hang up the
handset.
Troubleshooting Tip: If you do not hear a dial tone, adjust the slide
switch (A–G) until you do. Default setting A works for majority of desk
phones.
handset.
Troubleshooting Tip: If you do not hear a dial tone, adjust the slide
switch (A–G) until you do. Default setting A works for majority of desk
phones.
=
20
1 Call Status
• Idle = unlit
• Incoming call = fast blue flash
• On call = solid blue
• Call (headset mic) muted = slow blue
• Incoming call = fast blue flash
• On call = solid blue
• Call (headset mic) muted = slow blue
flash
2 Power LED
• Power off = unlit
• Powered = solid blue
• In pairing mode = Red/blue flashing
• Pairing successful = Solid blue
• Powered = solid blue
• In pairing mode = Red/blue flashing
• Pairing successful = Solid blue
3 Headset battery LED (when docked)
• Full Battery, charging stopped = solid
blue
• High, Charging = 3 Blue flashes every
10 seconds
• Medium, Charging = 2 Blue flashes
every 10 seconds
• Low, Charging = 2 Red Flashes
every10 seconds
• Critical, Charging = 3 Red flashes
every 10 seconds
1
2
3
Recycle where
facilities exist
NEED MORE HELP?
Technical support
plantronics.com/support
Online user guide
http://docs.plantronics.com/VoyagerLegendCS
FCC Requirements Part 15 and COFETEL NOM-121-SCTI-2009
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Requisitos de la FCC (sección 15) y por la COFETEL NOM-121-SCTI-2009
Su uso está sujeto a las dos condiciones siguientes:
1. Este dispositivo no puede causar interferencias nocivas.
2. Este dispositivo debe aceptar todas las interferencias recibidas, incluidas aquellas que puedan
causar un funcionamiento no deseado.
FCC Regulatory Information
FCC Requirements Part 15
FCC Requirements Part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the
equipment and receiver. 3. Connect the equipment into an outlet on another circuit that to which the receiver is
connected. 4. Consult the dealer or an experienced radio/TV technician for help.
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the
equipment and receiver. 3. Connect the equipment into an outlet on another circuit that to which the receiver is
connected. 4. Consult the dealer or an experienced radio/TV technician for help.
FCC Registration Information — Part 68
This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of
this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this
information must be provided to your telephone company. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements
adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed
to be connected to a compatible jack that is also compliant. See installation instructions for details. The REN
is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas,
the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you may connect to
your line, as determined by the REN, contact your local telephone company. For products approved after August
8, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For
earlier producers, the REN is separately shown on the label. If this telephone equipment causes harm to the
telephone network, the telephone company will notify you in advance that temporary discontinuance of service
may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The
telephone company may make changes in its facilities, equipment, operations, or procedures that could affect
the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make
necessary modifications to maintain uninterrupted service. If trouble is experienced with this unit, for repair or
warranty information, please contact customer service at (800) 544-4660. If the equipment is causing harm
to the network, the telephone company may request that you disconnect the equipment until the problem is
resolved.
this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this
information must be provided to your telephone company. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements
adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed
to be connected to a compatible jack that is also compliant. See installation instructions for details. The REN
is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas,
the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you may connect to
your line, as determined by the REN, contact your local telephone company. For products approved after August
8, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For
earlier producers, the REN is separately shown on the label. If this telephone equipment causes harm to the
telephone network, the telephone company will notify you in advance that temporary discontinuance of service
may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The
telephone company may make changes in its facilities, equipment, operations, or procedures that could affect
the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make
necessary modifications to maintain uninterrupted service. If trouble is experienced with this unit, for repair or
warranty information, please contact customer service at (800) 544-4660. If the equipment is causing harm
to the network, the telephone company may request that you disconnect the equipment until the problem is
resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user-serviceable components. We recommend
the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone
companies report that electrical surges, typi cally lighting transients, are very destructive to customer terminal
equipment connected to AC power sources.
the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone
companies report that electrical surges, typi cally lighting transients, are very destructive to customer terminal
equipment connected to AC power sources.
Exposure to RF Radiation
The internal wireless radio operates within the guidelines found in radio frequency safety standards and
recommendations, which reflect the consensus of the scientific community. Independent studies have shown
that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more information.
recommendations, which reflect the consensus of the scientific community. Independent studies have shown
that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more information.
In order to comply with FCC RF Exposure requirements, the base must be installed and operated such that a
minimum sepa ration distance of 20 cm is maintained between the base and all persons during normal operation.
The headset complies with FCC radiation limits set forth for an uncontrolled environment.
minimum sepa ration distance of 20 cm is maintained between the base and all persons during normal operation.
The headset complies with FCC radiation limits set forth for an uncontrolled environment.
NOTE Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the
equipment.
equipment.
BC
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
345 Encinal Street
Santa Cruz, CA 95060
United States
Please refer to the separate safety instructions for important product
safety information prior to installation or use.
The Voyager Legend CS Headset System consists of a CSEB-01 headset
base and a Voyager Legend Bluetooth headset.
safety information prior to installation or use.
The Voyager Legend CS Headset System consists of a CSEB-01 headset
base and a Voyager Legend Bluetooth headset.