Telrad Networks Ltd COMPACT2X 用户手册

Chapter 1 - System DescriptionThe BreezeCOMPACT Solution

Chapter 1: System Description

The BreezeCOMPACT Solution

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BreezeCOMPACT System Manual

The following sections describe each of these topologies.

1.1.3.1

Single Sector, Single Carrier

This is the basic configuration based on a single BS that supports a single sector 4 Tx/4 Rx with bandwidth of 5, 7, 10 &

20MHz (LTE). This configuration is recommended for achieving the aggregated power of 4 Tx ports as well as improved

diversity in Tx and Rx. This configuration is common for three-sector sites with a frequency reuse of 3.

Figure 2: Single Sector, Single Carrier

1.1.3.2

Single Sector, Dual Carrier

Two BSs support a single sector using two different carriers with a total bandwidth of 20 (10+10), 14 (7+7) or 10 (5+5)

MHz. The BreezeCOMPACT is connected to one 4x4 antenna. Each carrier can be configured for a different frequency.

Upon setting this mode, the load-balancing function balances according to the number of subscribers.

INFORMATION

In the current release, BreezeCOMPACT1000 and 3000 support all three topologies.

Note that BreezeCOMPACT2000 supports only the first topology (Single Sector, Single Carrier).