Telrad Networks Ltd COMPACT2X 用户手册

Chapter 1 - System DescriptionThe BreezeCOMPACT Solution

Chapter 1: System Description

The BreezeCOMPACT Solution

BreezeCOMPACT System Manual

BreezeCOMPACT System Manual

Two BSs support two sectors, each with a bandwidth of 5, 7 or 10 MHz. Each sector is connected to a different 2x2 antenna 

directed to two sectors. 

This configuration is commonly used with frequency reuse 2, where the two antennas connected to the BreezeCOMPACT 

are located back to back. This configuration is not applicable for BreezeCOMPACT2000.

In the system architecture, the antenna is approached as an independent element. This provides the operator with the 

flexibility to select the antenna’s source according to its supplier policy. To ensure the availability of antennas that 

complement the solution, Telrad works closely with several antenna suppliers to ensure availability of antennas that comply 

with its requirements.

In cases where the operator prefers other antenna vendors, Telrad can provide a recommended antenna specification based 

on the required antenna types.

Antennas may support mechanical down-tilt (MDT) using a suitable mounting kit, or electrical down-tilt (EDT) that may be 

either fixed or adjustable using a special adjustment screw.

In addition to a range of standard commercial antennas, Telrad also offers a special attached antenna designed for convenient 

installation on top of the BreezeCOMPACT unit. For the BreezeCOMPACT unit, a special mounting kit allows installation 

of a standard antenna on top of the unit to minimize the space required for installation.

.