Raytheon Anschuetz GmbH High Seas Products NSX-30U 用户手册
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition Sep 2015
2-45
4265.DOC020102
2.3.1.6
Automatic Clutter Reduction
When AUTO is activated FTC are hidden.
When AUTO is activated FTC are hidden.
This AUTO mode describes a control algorithm, which uses the evaluation of
echoes to calculate statistical average values for SEA and RAIN. These
average values are used for optimization of the Radar video.
echoes to calculate statistical average values for SEA and RAIN. These
average values are used for optimization of the Radar video.
Adjust the GAIN slider to control the sensitivity of the Radar.
Operator controls
Task
Switch over to AUTOmatic clutter reduction.
Use the trackball to place the cursor on the GAIN
slider then press the left trackball button.
slider then press the left trackball button.
Rotate the trackball to adjust the sensitivity of the
Radar.
Radar.
Use of AUTO simplifies Radar video optimization. However,
depending on the weather conditions misinterpretations are
possible.
depending on the weather conditions misinterpretations are
possible.
The algorithms for Automatic Sea Clutter suppression
(AUTO) have been developed based on data recorded on
several sea trials. As this functionality has been optimized
applying it to these scenarios sea states and environmental
conditions might be encountered where these anti- clutter
algorithms do not result in a Radar video presentation
satisfying the expectations of the user.
(AUTO) have been developed based on data recorded on
several sea trials. As this functionality has been optimized
applying it to these scenarios sea states and environmental
conditions might be encountered where these anti- clutter
algorithms do not result in a Radar video presentation
satisfying the expectations of the user.
If you find yourself in a situation where the Radar
presentation does not correspond to the information you
receive from other equipment or your own observations it is
highly recommended to switch to manual sea clutter
suppression to achieve the optimum presentation of the sea
area.
presentation does not correspond to the information you
receive from other equipment or your own observations it is
highly recommended to switch to manual sea clutter
suppression to achieve the optimum presentation of the sea
area.
It will be highly appreciated if you will inform Raytheon
Anschuetz in case of such an experience so that
appropriate measures could be taken to improve the
automatic sea clutter suppression function.
Anschuetz in case of such an experience so that
appropriate measures could be taken to improve the
automatic sea clutter suppression function.