Honeywell International Inc. WFSRM 用户手册

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C  5/8/2015

11

FWSG FlashScan Wireless System Gateway

1. This device may not cause interference, and 
2. This device must accept any interference, including interference that may cause undesired 

operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio 
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 

1. L'appareil ne doit pas produire de brouillage, et 
2. L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le 

brouillage est susceptible d'en compromettre le fonctionnement.

This device utilizes the Honeywell915 rev A radio module and complies with IFETEL standard(s).

Following are the specifications of the wireless gateway.  

  

External Supply Electrical Ratings

18V-30V

SLC Electrical Ratings

15V-30V

Maximum current when using the external supply

40mA

Maximum current when using the SLC power supply

24mA

Maximum SLC Resistance

50

Ω

Minimum signal strength level needed at the receiver for a 
primary path with weak link trouble reporting enabled.

-55dBm

Minimum signal strength level needed at the receiver for a 
secondary path or primary path with weak link trouble 
reporting disabled.

Must be 18 dBm higher than the noise 
floor down to a minimum of -80dBm

1

1 Ensure that the primary path signal strength level is within recommended guidelines 

to assure proper communication in the mesh network.

Maximum ambient noise level

-85dBm

Maximum RF Power Output

+17dBm (Tx power level without 
antenna)

Radio Frequency

Lower ISM Band (902 - 928MHz).

Gateway

0°C-49°C / 32°F-120°F

-10°C- 60°C / 14°F-140°F

10 to 93% RH

Non-condensing