Honeywell International Inc. WFSRM 用户手册

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C 5/8/2015

LED Indicators

LED Pattern

Condition

Action Required

Bootloader
normal

Slot request
rejected

Mesh forming

Sustained tamper

Bootloader
firmware update

Profile received

Battery check: all
batteries are fresh

Profile removed

Device is ready to update.

Device is not permitted
into the mesh.

Device is part of the mesh
and looking for devices that
are not in the mesh.

New application code is
being downloaded.

Device is now profile
assigned.

Maximum life of installed
batteries remaining in
device

Device has returned to the
factory default mode.

Legend

Number of blinks
LED color
Interval between blink patterns
Duration of LED state
Indicates value is approximate

Two blinks in this pattern

First blink is green. Second is yellow
7 seconds between blink patterns

Will transition to next state after
approximately 20 minutes

Example:

All units are in seconds. Minute is indicated by “M”.

Confirm device count and
software version.

Device is tampered.

Solid

Distributor mode

Device is distributing its
profile to other devices
which requested a profile.

.wmf

2.5

0.5

Ensure detector is seated in the
base and the module has the
faceplate on.

Rescue mode

Device is functioning as
normal and searching for
lost devices.

Normal mode or
tested walk test

Device is distributing as
normal or it has been
tested in a walk test.

Device LED Patterns

Use SWIFT Tools to initiate
download.

Self test fail

Low battery cut-off

Device has failed internal
self diagnostics.

Device is functioning.

Replace batteries.

Restart the device. If problem
persists, contact technical support.

Solid