Vertex Standard USA Inc. 11273020 用户手册
12
VX-264 O
perating
M
anual
o
Peration
Preliminary.Steps
r
Install a charged battery pack onto the transceiver, as
described previously.
r
Screw the supplied antenna
onto the Antenna jack.
It is not recommended to oper-
ate this transceiver without an
antenna connected.
r
If you have a Speaker/Micro-
phone, we recommend that it
not be connected until you are
familiar with the basic opera-
tion of the VX-264. Refer to
next page for more information
about Speaker/Microphone us-
age.
IMPORTANT NOTE
Water resistance of the transceiver (IP55) is as-
sured only when the following conditions:
r
r
Battery pack is attached to the transceiver;
r
Antenna is connected to the antenna jack;
r
and MIC/SP cap is installed in the MIC/SP
jack.
r
Use of a speaker microphone in the MIC/SP
jack negates the IP55 rating.
Operation.Quick.Start
r
Turn the top panel’s
VOL/PWR knob clock-
wise to turn the radio on.
r
Turn the top panel’s CH Selector knob to choose the
desired operating chan-
nel. A channel name will
appear on the LCD.
r
If you want to select the operating channel from a dif-
ferent Channel Group, press (or press and hold) the
Programmable key assigned to the “g
rouP
u
P
/d
oWn
”
function to change desired Channel Group before se-
lecting the operating channel.
Note: Some models are programmed so that the oper-
ating channels are selected by the Programmable key
and the Channel Group is selected by the CH Selector
knob. For further details, contact your Vertex Standard
dealer.
FCC ID: AXI11273020
IC: 10239A-11273020
Vertex Standard LMR, Inc.