Vertex Standard USA Inc. 11273020 用户手册

r

 Rotate the VOL/PWR

knob to set the volume

level. If no signal is pres-

ent on the analog chan-

nel, press (or press and

hold) the Programmable

key  (assigned  to  the

“sql oFF” function:

Normally SIDE-1 but-

ton); background noise

will now be heard, and

you may use this to set

the VOL/PWR knob for

the desired audio level.

Press (or press and hold) the Programmable key again to

quiet the noise and resume normal (quiet) monitoring.

r

 To transmit, monitor the

channel and make sure it

is clear.

 Press and hold the PTT

switch. Speak into the

microphone area of the

front  panel  grille  in  a

normal voice level. To return to the Receive mode, re-

lease the PTT switch.

r

 Press (or press and hold)

the  ,SIDE-1  SIDE-2

button, or front panel’s

programmable keypad

([A] - [D] key) to ac-

tivate  one  of  the  pre-

programmed functions

which  may  have  been

enabled at the time of

programming  by  the

dealer.  See  the  next

chapter for details re-

garding feature availabil-

ity for this radio.

r

 If a Speaker/Microphone

is available, remove the

plastic cap and its two

mounting screws from

the  right  side  of  the

transceiver, then align

the  connector  of  the

Speaker/Microphone on

the radio; secure the con-

nector pin using the screws supplied with the Speaker/

Microphone. Hold the speaker grille up next to your

ear while receiving. To transmit, press the PTT switch

FCC ID: AXI11273020

IC: 10239A-11273020

Vertex Standard LMR, Inc.