Nautel Maine Inc VS300 用户手册
VS300 Operations and Maintenance Manual
Operating the transmitter
Page 2-58
Issue 0.1 2011-03-11
Viewing transmitter status
You can view the VS300’s operational status using the AUI’s
Transmitter Status page - see
Figure 2.57
. This page shows current active alarms and status to aid in fault diagnosis. To view the
Transmitter Status page
, select
Transmitter Status
from the
Menu
options.
Figure 2.57: Transmitter Status page
Click the
X
to close this page and return to the home page.
The left-hand section of the
Transmitter Status
displays tabs that list all transmitter alarms and
meters (as selected). Alarms are listed by their host device (Controller or Exciter), alarm name and
severity level [1 = low (RF output not affected), 5 = medium (RF output is reduced), 10 = high (RF
output is inhibited)].
severity level [1 = low (RF output not affected), 5 = medium (RF output is reduced), 10 = high (RF
output is inhibited)].
Click an item in the
Alarms
or
Meters
tab to display its details on the right-hand section. For the
Alarms tab, details include a description of the alarm and help text (e.g., troubleshooting tips). For the
Meters tab, click
Meters tab, click
Show Meter List
to display a list of selectable meters. Select the desired real-time
meters to display on the left-hand side of the screen to assist in troubleshooting. Meter colour coding
is identical to that described in
is identical to that described in
Click the
Reset
button at the bottom of any AUI screen to attempt to clear any latching alarms that
are holding the transmitter in an “off-air” state (see
has cleared, the transmitter should resume operation.