Nautel Maine Inc VS300 用户手册
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-57
Setting local/remote control
You can set the transmitter’s local/remote control using the remote AUI’s
Local/Remote
button (see
) or using the local front panel display (see
Using the front panel
When you select
Local/Remote
from the
Main Menu
, you can set the local/remote operating
).
Figure 2.55: Local/Remote Selection Screen
Use the up and down buttons to toggle between
Local
and
Remote
. Press the accept (checkmark)
button to save the change. Press the cancel (
X
) button to discard changes and return to the previous
menu.
Resetting alarms
You can attempt to reset any latching transmitter alarms that are holding the transmitter in an “off-
air” state using the remote AUI’s
air” state using the remote AUI’s
Reset
button (see
) or using the local front
panel display (see
).
Using the front panel
When you select
Reset Alarms
from the
Main Menu
, you can attempt to reset latched protection
circuits in the VS300 (see
). If the alarm condition has been cleared, the alarm indication
on the
View Alarms
screen should disappear.
Figure 2.56: Reset Alarms Screen
Use the up and down buttons to toggle between
Reset Alarms
and
Cancel
. Press the accept
(checkmark) button to save the change. Press the cancel (
X
) button to return to the previous menu.