Nautel Maine Inc VS300 用户手册
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-77
Changing hardware settings
You can establish calibration values and fault thresholds for critical parameters of the VS300 using
the remote AUI or using the local front panel display. The following options are available:
the remote AUI or using the local front panel display. The following options are available:
•
•
•
•
•
•
WARNING: Hardware settings are established at the factory and
should not require any adjustment. Making changes to these settings
may void your warranty. Contact Nautel before making changes.
Note:
Changing threshold values in the System Settings -> Thresholds menu and changing the console
selection in the System Settings -> Console Select menu is not normally required, and should only
be performed by trained personnel. Information on these sub-menus is not included in the manual.
Contact Nautel for assistance.
selection in the System Settings -> Console Select menu is not normally required, and should only
be performed by trained personnel. Information on these sub-menus is not included in the manual.
Contact Nautel for assistance.