HP 6000WLAN 用户手册
Troubleshooting and Maintenance
Troubleshooting Techniques
Reference GuideStartup Guide
101
If the computer can’t find Wordpad.exe after inserting a CD
•
The system is trying to open a .doc file in WordPad, but cannot find the Wordpad.exe
program file. Type C:\Program Files\Accessories in the error message box.
Display Problems
If the computer is on, but the screen is blank
•
Move the mouse or pointing stick, or tap the touch pad. This will wake the display if
it is in Display-off mode.
•
Press Fn+F5 in case the internal display was disabled. (Do this three times to return to
the state you started from.)
•
If the computer is cold, allow it to warm up.
If the screen is difficult to read
•
Try setting the display resolution to its default setting of 1024×768 or 1400 × 1050:
click Start, Settings, Control Panel, Display, Settings.
If an external display does not work
•
Check the connections.
•
Press Fn+F5 in case the external monitor was disabled. (Do this three times to return
to the state you started from.)
•
The external monitor may not be detected. In the BIOS Setup utility, try setting Video
Display Device to Both in the Main menu.
•
If you’re using a TV connected to the S-video port, you must activate the TV— see
“To use a TV set as a monitor” on page 86.
•
Test the display with the e-DiagTools diagnostics. See “Testing the Hardware” on
page 120.
If an external display cannot use high resolutions
•
For Windows 98, use the default display type for the internal display: Default
Monitor. If you change the display type, non-Plug-and-Play (non-DDC) external
monitors will not be able to use resolutions higher than the resolution of the internal
display. You can check display settings using Display in Control Panel, or by right-
clicking the desktop and then clicking Properties.
monitors will not be able to use resolutions higher than the resolution of the internal
display. You can check display settings using Display in Control Panel, or by right-
clicking the desktop and then clicking Properties.