HP 6000WLAN 用户手册

Troubleshooting and Maintenance

Reference GuideStartup Guide

103

•

  For Windows 98, if you insert the floppy drive after docking, the drive A icon may

not be available. To be recognized, the drive must be present when the computer
docks or boots. If the drive A icon is missing, either dock the computer again with the
floppy drive installed, or reboot the computer.

•

  If you install an IDE drive in a docking system PC device bay, you should set the IDE

jumpers on the drive to the Single or Cable Select setting. Whenever you want to
partition or format a drive that’s larger than 8 GB, you must first use Device Manager
to turn on the Int 13 setting for the IDE drive.

Hard Disk Drive Problems

•

  Make sure the computer has power. If necessary, connect the AC adapter, and make

sure it is fully plugged into a power source and into the rear of the computer.

•

  Remove and reinsert the hard drive. See “Replacing the Hard Disk Drive” on page 94.

•

  Back up the drive immediately.

•

  See whether the noise is coming from elsewhere, such as from the fan or a PC Card

drive.

•

  In Windows 98, run the Scandisk surface scan to check the hard disk. From the Start

menu, click Programs, Accessories, System Tools, Scandisk.

•

  For Windows ME or 2000, open My Computer, select the disk you want to scan, click

File, Properties, and use the Tools tab.

•

  Run the VirusScan program. See “To protect against viruses” on page 43.

•

  Run the VirusScan program. See the chapter titled “Basic Operation” in the online

Reference Guide.

•

  Test the hard disk drive with the e-DiagTools diagnostics. See “Testing the

Hardware” on page 120.