Andrew Wireless Innovations Group RPT-MR701 用户手册
User’s manual for Repeater MR801B Power
M0067A0A.doc
Id.-No 151111
Page 63
02-JUNE-99
Take off the whole control module completely with mounting plate by unscrewing four tallow
drop screws M4.
drop screws M4.
For mounting proceed in reverse order.
Position of the control module in the Repeater is illustrated in figure 9-11 Position of control
module.
module.
figure 9-11 Position of control module
9.10 Replacement of power supplies
F
Note:
Ensure that mains are disconnected.
There are four power supplies mounted in the Repeater housing, two on each side. Open the
Repeater to get access to the devices.
Repeater to get access to the devices.
Remove all connected cables from the clamps of the power supply. Try to loose the plug by
means of a small screwdriver placed between the plug and socket.
means of a small screwdriver placed between the plug and socket.
ON
Fuse 10A / 35V
figure 9-12 Power supply