Andrew Wireless Innovations Group RPT-MR701 用户手册

User’s manual for Repeater MR801B Power

M0067A0A.doc

Id.-No 151111

Page 65

02-JUNE-99

figure 9-14 Position of counter sunk screws on active combiner

The cabling of the active combiners depends on the configuration of the Repeater. For correct
connections see assembly guide for the channel modification kits

There is one amplifier mounted on each side of the Repeater. They are fixed to the housing by
means of 6 socket head cap screws M4x25.

A special reset board is connected to the 15 pole SUB-D connector. (See figure 9-15 Position
of the feed forward amplifier reset board)

This reset board is part of the feed forward amplifier. A new feed forward amplifier will be
delivered with a premounted reset board.

counter
sunk
screws