Andrew Wireless Innovations Group RPT-NODEC1943 用户手册

 

User’s Manual for Node C Network Elements

 

Page 14 

PRELIMINARY M0121A1A_uc.doc

 

 
•  Check the wall mounting kit and the wall to determine their suitability. 
 
•  The maximum distance between the Node C and the Interface Unit depends on 

the length of the cable bridge by which they will be connected (see table 3-1 
Mounting distance). Thus, before marking the mounting positions, check the 
length of the cable bridge and make sure to install the units at a suitable distance. 

 

Mounting style: 

beside each other* 

one above the other** 

Length of cable bridge:  500 mm  800 mm  2000 mm  only 2000 mm possible 
Maximum distance 

140 mm  400 mm  1600 mm  1000 mm (min.=300 mm)

*   Maximum distance is referring to distance between the cabinet sides 
**  It is recommended to install the Node C above the 

Interface Unit

; max. distance is the distance 

between top of lower and bottom of upper unit  

) 

other. To install one above the other proceed in the same way, also 
observing the specified mounting distance from table 3-1. 

•  Mark the position of the eight drilling holes (four per unit) for the Node C and 

Interface Unit according to figure 3-1. Please observe that the figure always 
shows a pair of drill holes for each position. Only drill one of each pair.