Andrew Wireless Innovations Group RPT-NODEC1943 用户手册
User’s Manual for Node C Network Elements
Page 16
PRELIMINARY M0121A1A_uc.doc
3.1.3 Connection
Option
• In order to mount the system using the cabinet combining kit, dismount the
mounting brackets from the cabinets of the units by loosening the hexagon head
screws M10x20 by which the brackets are screwed to the housing (four per unit).
Do not unscrew those screws, only loosen them by approx. three turns and take
off the brackets.
screws M10x20 by which the brackets are screwed to the housing (four per unit).
Do not unscrew those screws, only loosen them by approx. three turns and take
off the brackets.
• The two inner brackets are no longer required; exchange the outer brackets and
fasten them to the cabinets (as indicated below).
Remove and discard
1st step:
2nd step:
Bracket 1
Bracket 1
Bracket 2
Bracket 2
Exchange Bracket 1
and Bracket 2; then
mount as shown:
and Bracket 2; then
mount as shown:
3rd step:
Join units and mount
joint system to wall
G0987MG
figure 3-3 Connection option
G0987MG
Washer DIN125
Hexagon head
screws M10x4
screws M10x4
M10 nuts
Brackets
Connecting plate
• Join the two cabinets using
the parts of the cabinet
combining kit as indicated.
combining kit as indicated.
• Use the special mounting
plan supplied as part of the
cabinet combining kit for
drilling the according holes
and mount the system to the
wall.
cabinet combining kit for
drilling the according holes
and mount the system to the
wall.
figure 3-4 Cabinet combining kit