Hammer Fiber Optics Investments LTD. AIRTC31 用户手册
Step 6: Routing RG6 cable(s)
You will route RG6 cable from AIR transceiver (LNB) to the Power inserter, then from
Power inserter to splitter (optional) and then to the cable modem.
Power inserter to splitter (optional) and then to the cable modem.
Figure 9: AIR CPE connections 2
For best reception we suggest the usage of a coax cable with this value or similar.
For best reception we suggest the usage of a coax cable with this value or similar.
Impedance:
75 ohm
Core line impedance:
<= 61 ohm/km
Attenuation:
at 862MHz <=24 dB/100m
Usage:
outdoor
Connector used:
Cabelcon F56-CX3 5.1
Caution
A typical 3-way splitter has an attenuation of app. 6 dB per port.
If power supply is not near enough the transceiver will show disturbance when
modem will transmit data.
Compression connectors are used to achieve better quality of the signal and better
water insulation of the cable.
If power supply is not near enough the transceiver will show disturbance when
modem will transmit data.
Compression connectors are used to achieve better quality of the signal and better
water insulation of the cable.