Troll Systems Corporation SLLBTX646501 用户手册
User Manual
6.5 GHz RF Linkbox for Tracking Antenna - Troll Systems Corporation
32
Document 200610D - 7/11/17
6. MAINTENANCE AND TROUBLESHOOTING
This section includes system maintenance requirements as well as troubleshooting
suggestions to aid in any system operational issues. In the event of a malfunction, this
section contains information and procedures for the maintenance and troubleshooting
of issues that could occur that may effect the proper operation of the system. Refer to
the following sections herein to address these potential issues and the suggested
procedures to correct them. In the event that the issue is not addressed in the
Troubleshooting section, or the suggested action does not correct the problem, contact
the manufacturer at the contact information listed within the manual herein.
suggestions to aid in any system operational issues. In the event of a malfunction, this
section contains information and procedures for the maintenance and troubleshooting
of issues that could occur that may effect the proper operation of the system. Refer to
the following sections herein to address these potential issues and the suggested
procedures to correct them. In the event that the issue is not addressed in the
Troubleshooting section, or the suggested action does not correct the problem, contact
the manufacturer at the contact information listed within the manual herein.
6.1
MAINTENANCE
The linkbox does not have any maintenance requirements.
6.2
TROUBLESHOOTING
If a malfunction or operational anomaly occurs during usage of the airborne system,
refer to the following Troubleshooting table to identify and possibly correct the problem.
refer to the following Troubleshooting table to identify and possibly correct the problem.
for troubleshooting suggestions:
Table 6–1. Troubleshooting the Controller
Symptom
Probable Cause
Suggested Action
The Linkbox screen is blank, front
panel indicators are not illuminated.
panel indicators are not illuminated.
1.
Power is not being supplied to
the Linkbox.
the Linkbox.
1.
Check 20 Amp aircraft circuit
breaker. Reset if necessary.
breaker. Reset if necessary.
2.
The Linkbox is not turned ON.
Linkbox is not controlling the
transmitter (not responding).
transmitter (not responding).
1.
Transmitter is not Online (i.e.,
Online indicator on TX Page is
red).
Online indicator on TX Page is
red).
2.
Transmitter is not properly
configured on the Linkbox.
configured on the Linkbox.
1.
Verify that the transmitter is
powered ON. Turn the
transmitter ON via the TX Page
(if powered OFF).
powered ON. Turn the
transmitter ON via the TX Page
(if powered OFF).
2.
Check transmitter
configuration. Correct
configuration issues as
necessary.
configuration. Correct
configuration issues as
necessary.