Custom Molded Products CMPB2GC395915 用户手册

2

1. OPERATION INSTRUCTIONS

1.

Power On / Main Menu

a. Press and Hold Power Key to power up controller and activate the

system. Program setting will appear two sec for reference. NOTE: If 
water level is too low, system will not activate and display will show 
temporarily display “No H2O.”

b. Main screen will display current active settings
c. Press and Hold Power Key to power system OFF.

2. Light Functions

a. Tap the Power Key to cycle to Light menu.
b. Tap the “OK” Key to toggle Light ON.
c. Use arrow keys to select light color menu
d. Tap “OK” to cycle light colors.
e. To turn lights OFF, tap arrow keys to select “ON. Tap “OK” key to turn

lights OFF.

3. Pump Functions

a. Tap the Power Key to cycle to Pump menu.
b. Tap the “OK” Key to toggle pump ON/OFF.
c. Tap RIGHT arrow to select available jet settings. Tap LEFT arrow to

select a different seat or zone (if available).

d. Tap “OK” to cycle through settings of selected jets:

i.

0 = OFF

ii.

1 = Constant ON (NOTE: For waterfall only 0 or 1 are available)

iii. 2 = 0.5 second jet sequence pattern
iv.

3 = 1.0 second jet sequence pattern

v.

4 = 1.5 second jet sequence pattern

e. To turn OFF, tap arrow keys to select “ON. Tap “OK” key to turn OFF.

4. Blower Functions

a. Tap the Power Key to cycle to the Blower menu.
b. Tap the “OK” Key button to toggle ON. The blower will start on the

highest fixed blower speed setting of “6”.

c. Use arrow keys to select blower speed settings. To adjust the “fixed”

blower setting Tap “OK” Key. The blower has six fixed speeds that can 
be adjusted from “6” to “1”.

3-B

2-B

4-B

3-C,D

2-C,D

4-C

OK

POWER KEY

•

Power On/OFF

•

Cycle between

Sub-Menus

“OK”  KEY

•

Cycle Sub-Menu

Settings and 

Options

ARROW  KEYS

•

Move between

Sub-Menus 

Selections