Custom Molded Products CMPB2GC395915 用户手册

d. Use arrow keys to select blower mode settings. The blower defaults to

the “fixed” setting. Tap “OK” to cycle between Wave, Pulse and Fixed.

e. To turn blower OFF, tap arrow keys to select “ON. Tap “OK” key to turn

blower OFF.

5. Timer Settings

a. Tap the Power Key to cycle to the Timer menu.
b. Use arrow keys to adjust system off timer. The timer can be adjusted

preset increments between 5 and 60 minutes.

3.

“TOO HOT” ERROR

If water temp exceeds 111°F the screen will display the

message “Too Hot” and the system will shut down

completely.

4-D

5-B

2.

REMOTE CONTROL OPERATION

ON/OFF

LIGHT 

BLOWER

WAVE/PULSE

MINUS

PLUS

TIMER

PUMP 1

PUMP 2

BACK JET 1

BACK JET 2

NECK JET 1

NECK JET 2

3

R

emote control pairing: 

Turn off the controller

Press continuously“         ”for 10 seconds on the remote control. 

When the control system is turned off, press continuously “           ”for 3 S

，and the LCD will display “ Pair ”.

The system enters remote control pairing state. 

Press any button within 10 seconds on the remote control, and the LCD will quit displaying. 

The buzzer in the control panel will ring once, indicating pairing is done. 

If no button on the remote control is pressed within 10 seconds, the control system will exit from pairing state.