Yamaha Corporation 11F59 用户手册
8 Connect one end of the 50-pin SCSI flat cable to the computer’s SCSI adapter card.
Align the red line of the cable with Pin 1 of the card’s SCSI connector. Then put
the SCSI adapter card back into its original slot in the computer. Next, connect a
free 50-pin connector on the SCSI flat cable to the back of the CRW6416S drive
such that the red line on the cable is aligned with Pin 1, marked “SCSI
INTERFACE CONNECTOR 1.”
the SCSI adapter card back into its original slot in the computer. Next, connect a
free 50-pin connector on the SCSI flat cable to the back of the CRW6416S drive
such that the red line on the cable is aligned with Pin 1, marked “SCSI
INTERFACE CONNECTOR 1.”
50-pin SCSI flat cable
AUDIO
OUT
ID SEL
ECT
PARITY
TERM
INATO
R
BLOCK
SIZE
SCSI
INTER
FACE
CONN
ECTOR
DC IN
PUT
1
+5V
G
+12V
R
L
1 2 4
G
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR
with Pin 1 of
SCSI INTERFACE
CONNECTOR
Pin 1
SCSI
INTERFACE
CONNECTOR
INTERFACE
CONNECTOR
1
To Pin 1
SCSI adapter card
Mark
Mark
Mark
Pin 1
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR
with Pin 1 of
SCSI INTERFACE
CONNECTOR
32
Installation
2/19CRW/e.qx 2/19/99 5:46 PM Page 32