Panasonic Corporation of North America 9TGCF-293 用户手册

13

If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN
adaptor.] is displayed, select [Yes].

9

Enter your administrator password and select 

.

Wait until the hard disk drive indicator ( ) has turned off.

Remember this password!  If the password is forgotten, Windows cannot be
operated.

1

At [Welcome to the Windows 2000 Setup Wizard], select [Next].

2

After reading the agreement, select [I accept this agreement] or [I don’t accept this
agreement], then select [Next].

If [I don’t accept this agreement] is selected, the Windows setup will be aborted.

3

Select settings for your region, then select [Next].

4

Enter your name and organization and then select [Next].

5

Enter your computer name and administrator password and then select [Next].

Do not press any keys or touch the touch pad until [Windows 2000 Professional
Setup] is displayed.

6

Enter the correct date, time and the time zone, then select [Next].

7 At [Networking Settings], select [Typical settings], then select [Next].

8

At [Workgroup or Computer Domain], select [No, this computer is not on a
network, or is on a network without a domain], then select [Next].
The computer will restart.

9

At [Welcome to the Network Identification Wizard], select [Next].

10

At [Users of This Computer], select [Users must enter a user name and password to
use this computer], then select [Next].

11

Select [Finish].

12

Enter your administrator password and select [OK].
Wait until the hard disk drive indicator ( ) has turned off.

1

Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].

2

Touch the “+” mark on the calibration screen  with the stylus (included) for about one second.

3

After the calibration procedure is executed (e.g., after the nine “+” marks are touched),
the procedure ends when   Enter   is pressed.

1

Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].

2

Touch the “+” mark on the calibration screen  with the stylus (included) for about one second.

3

After the calibration procedure is executed (e.g., after the nine “+” marks are touched),
the procedure ends when   Enter   is pressed.