Panasonic Corporation of North America 9TGCF-293 用户手册

15

Slide the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.

Under the condition that both the AC adaptor and the port replicator are not con-
nected, the power will not go on if the display is closed.
While booting, avoid the following until the hard disk drive indicator ( ) has turned
off.

• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen (only for models with touch-

screen), or external mouse operations.

• Closing the display.

Once the computer is powered off, you must wait at least ten seconds before pow-
ering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating.  Should this happen, allow the computer to cool down then
switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.

1

Pull the carrying handle forward.

2

Press the latch as illustrated to release it from the computer.

3

Lift up the latch and open the display.

Three incorrect attempts

or

No password for about a minute

The correct password

Enter your password*

1

 and press   Enter   . (

 

 “Security Measures”)

*

1

Supervisor Password or User Password set in the Setup Utility (not
the Windows password).

Enter Password [        ]

When the power is turned on, sometimes the message “Warming up the system” is
displayed or the battery indicator alternately blinks green and orange, and start-up
takes longer than usual (a few minutes or more).  This function is designed to prevent
hard disk drive malfunctions that may occur at low temperatures.  Please wait for the
computer to start up.

The standby or hibernation mode has been set (

 

 “Standby/Hibernation Func-

tions”).

1

2

3