Furuno USA Inc 9ZWFM3000 用户手册

4.Scan Operation

12

INT

25W

DUP

TAG
INTL

INT

25W

DUP

TAG
Normal scan

BUSY

INT

25W

DUP

TAG
Normal scan

Push

Scan starts.

When a signal is received

[Example]: Starting a Normal scan.

For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Chan-
nels not tagged will be skipped during scanning. Tag chan-
nels can be assigned to each channel group (U.S.A., Interna-
tional, Canada) independently.

q While pushing [HI/LO], push [CH/WX] (

) one or

more times to select the desired channel group.

w Select the desired channel to be set as a tag channel.
e Push [SCAN] (

) for 1 sec. to set the displayed channel

as a tag channel.

• “TAG” appears in the display.

r To cancel the tag channel setting, repeat step e.

• “TAG” disappears.

➥While pushing 

], push 

for 3 sec. (until

a long beep changes to 2 short beeps) to clear all tag chan-
nels setting in the channel group.

• Repeat above procedure to set all tag channels.

Set scan type (Priority or Normal scan) and scan resume
timer in advance using Set mode. (p. 38)

q Set tag channels as described at left.
w Make sure the squelch is closed to start a scan.
e While pushing [HI/LO], push [CH/WX] (

) one or

more times to select the channel group, if desired.

r Push [SCAN] to start Priority or Normal scan.

• “Pri Scan 16” or “Normal Scan” appears in the function

display.

• When a signal is detected, scan pauses until the signal disap-

pears or resumes after pausing 5 sec. according to Set mode
setting. (Channel 16 is still monitored during Priority scan.)

• Rotate  [CHANNEL] to check the scanning tag channels, to

change the scanning direction or resume the scan manually.

• “16” blinks and a beep tone sounds when a signal is received

on Channel 16 during Priority scan.

t To stop the scan, push [SCAN].