Furuno USA Inc 9ZWFM3000 用户手册

13

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.

This function is not available when the MMSI code has

been programmed by the dealer. This code programming can
be performed only twice.

q Turn power OFF.
w While pushing [DSC/ENT], turn power ON to enter MMSI

code programming condition.

e After the display appears, release [DSC/ENT].

r Edit the specific MMSI code by rotating [CHANNEL].

• Push [CH/WX] or [SCAN] to move the cursor forward or back-

ward, respectively.

t Input the 9 digit codes, then push [DSC/ENT] to set the

code.

• Returns to the normal operation.

A total of 40 DSC address IDs can be programmed and
named with up to 10 characters.

D

D Programming Address ID/Group ID

q Push [DSC/ENT] to enter the DSC menu.
w Rotate  [CHANNEL] to select “Set  up,” push

[DSC/ENT].

e Rotate [CHANNEL] to select “Add ID,” push [DSC/ENT].

Set up
˘Add ID
 Delete ID
 Offset Time

Sel Item
 POS Report
 DTRS Set
˘Set up

Set MMSI

ä23456789