Furuno USA Inc 9ZWFS1575 用户手册
10. NBDP TRANSMISSION, RECEPTION
10-2
For IB-585:
• To enter the frequency, press the 9 key to select [Set Frequency]. Go to step 3.
• To enter the frequency, press the 9 key to select [Set Frequency]. Go to step 3.
• To enter the ITU or user channel, press the 0 key to select [Set Channel]. Go to
step 4.
3. Input a pair of TX and RX frequencies. Go to step 5.
4. Input the user channel. To select the user channel from the list, press the
4. Input the user channel. To select the user channel from the list, press the
→ key
to display [User Channel List]. Press the
↑ or ↓ key to select the desired user
channel.
5. Press the Enter key.
Note: You can not set frequency or user channel in the following cases;
• When opening the menu from the control panel (FS-2575C).
• When communicating by radiotelephone.
• When the DSC scan screen is displayed.
• When sending DSC calls.
• When opening the menu from the control panel (FS-2575C).
• When communicating by radiotelephone.
• When the DSC scan screen is displayed.
• When sending DSC calls.
6. Press the function key F3 then the 8 key to select [Manual Calling].
7. Press the
← or → key to select a communication mode.
8. Press the
↓ key then input party's ID number.
9. Press the Enter key to connect the communication line. "Channel Busy Check"
appears. If the line is free, "Connect", "Send" and "Lock" appear in highlight as be-
low.
low.
Set Frequency
Tx Freq
:
0
.00
RX Freq : 0.00
Set Channel
Channel :
User Channel List
No. Channel TX Freq RX Freq
1 02001 2174.5 2174.5
2 04001 4177.5 4177.5
3 06001 6268.0 6268.0
4 08001 8376.5 8376.5
5 012001 12520.0 12520.0
6 016001 16695.0 16695.0
Mode
:
ARQ
FEC
ID :
Manual Calling
Station Name :
Frequency (T/R) : 8765.00 / 8965.00(kHz) Comm Mode :ARQ
Comm Status :
Connect
Send
Lock
Error
Sending Volume : 100(%) ARQ Error : 0 ARQ Time : 0(sec)
Caps-Eng
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
10-Apr-2012 15:10:30 UTC