Furuno USA Inc 9ZWFS1575 用户手册
10. NBDP TRANSMISSION, RECEPTION
10-4
How to send a file stored on a floppy disk or an SD card
1. Press the function key F7 to request the answerback code of the other station.
Verify that the code from the station called is correct.
2. Press the function key F8 to transmit your own identity (answerback code).
3. Press the function key F3 then the 3 key to open the [Send File] window.
4. Press the
3. Press the function key F3 then the 3 key to open the [Send File] window.
4. Press the
↑ or ↓ key to select the file to send and press the Enter key.
5. Press the Enter key again.
Sending volume (percentage of message transmitted, counts upward as the mes-
sage is being transmitted), ARQ error count and ARQ transmission time appear
on the screen. "Lock" appears in reverse video when the mark and space signals
in the received signal are normal. [ARQ Error] shows the number of errors found
during transmission. [ARQ Time] is the time in seconds the communication con-
nected.
sage is being transmitted), ARQ error count and ARQ transmission time appear
on the screen. "Lock" appears in reverse video when the mark and space signals
in the received signal are normal. [ARQ Error] shows the number of errors found
during transmission. [ARQ Time] is the time in seconds the communication con-
nected.
6. After the message is transmitted, press the function key F10 to disconnect the
line.
How to type a message from the keyboard
1. After exchanging answerback code by the function keys F7 and F8, type your
message directly from the keyboard.
2. To change the direction of traffic, press the function key F9, or + and ? in order.
The other station becomes the information sending station, your station becomes
the information receiving station. Receive a message from the sending station.
the information receiving station. Receive a message from the sending station.
3. After you have completed communications, press the function key F7 to request
the answerback code of the other station.
4. Press the function key F8 to transmit your own answerback code.
5. Press the function key F10 to disconnect the line.
5. Press the function key F10 to disconnect the line.
Note: When you are requested to change the direction of traffic while transmitting a
message, or communication is interrupted because of an error, some of the final char-
acters on the screen may not be sent to the receiving station.
message, or communication is interrupted because of an error, some of the final char-
acters on the screen may not be sent to the receiving station.
[A:\TEST1. ]
File name Size Date & Time
LOG File 52 12-04-15 17:25
TEST1. 120 12-04-10 16:30
TEST2. 151 12-04-11 09:25
TEST3. 180 12-04-11 20:16
NBDP 169 12-04-12 06:23
[ End of Directory ]
4 Files exist 1454000 bytes free
To select : ENTER To view : SPACE To quit : ESC
Send File
Station Name :
Frequency (T/R) : 8765.00 / 8965.00(kHz) Comm Mode :ARQ
Comm Status :
Connect
Send
Lock
Error
Sending Volume : 100(%) ARQ Error : 0 ARQ Time : 0(sec)
Caps-Eng
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
10-Apr-2012 15:10:30 UTC