Furuno USA Inc 9ZWRTR113 用户手册
1. INSTALLATION AND WIRING
8
3. Apply silicone rubber to the thread of the stud bolts (M12
70, 4 pcs).
Note: Apply silicone rubber to the part of thte bolt threads that are inside the bolt
hole (see the figure at step 4).
hole (see the figure at step 4).
4. Insert four stud bolts into the threaded holes in the antenna unit.
The stud bolts must make contact with the bottom of the threaded holes.
Note: Do NOT cover the vent hole at the bottom of the unit.
Note: Do NOT cover the vent hole at the bottom of the unit.
5. Place the antenna unit on the mounting platform with the BOW mark on the unit
aligned with the ship’s bow.
Stud bolt
Silicone rubber
Detailed view
Vent hole:
Do NOT cover this hole.
Do NOT cover this hole.
Silicone
rubber
rubber
Stud bolt
Corrosion-proof
rubber pad
rubber pad
Do not fasten stud bolts tightly after
the bolts contact with the bottom of
the threaded holes.
the bolts contact with the bottom of
the threaded holes.
If the bolts are fastened excessively, the
chassis bottom may be damaged and
malfunction can result.
chassis bottom may be damaged and
malfunction can result.
NOTICE
BOW mark
BOW mark
Bow
Bow