Visteon Electronics Germany GmbH 9178 用户手册

Rotary and push knob 

Rotary/push knobs
The rotary and push button 



 

→ 

 

1

is re-

ferred to as volume control or on/off button.
The right turn and push button

4

 is re-

ferred to as control.

Turning the radio manually on or off
Press the on/off button briefly  

→ 

 

1

.

Turn the radio on or off automatically
According to its version, the unit is automatically

turned off when the engine is turned off or the

ignition key is removed from the ignition lock. If

the radio is manually switched on again, it will be

automatically switched off after approximately

30 minutes (timeout).

Volume increase ore decrease
Once on, the radio starts to operate at the last

adjusted volume level, as long as the maximum

pre defined turn on volume is not surpassed

→ 

–

Turn the volume control  (right or clockwise

to turn up and left or counter clockwise to turn

down)

Some volume adjustments can be preset

→ 

Mute
When in mute mode, the active audio source is

interrupted or muted The indication can be seen

on the display screen .

–

Turn the volume control button  counter

clockwise until audio can no longer be heard.



The unit is protected against theft and unauthor-

ized use by a security code (anti-theft coding) .
After its first being entered, the anti theft code is

saved to the memory of the vehicle (convenience

coding of the radio) If the anti-theft coding has

to be manually deactivated, e.g. when installing

the unit in another vehicle, please contact a

Volkswagen Dealership.

If the vehicle battery has been disconnected,

switch the ignition on before switching the unit

on.



To operate the radio buttons

2

 press

them shortly or protractedly.

RADIO

: turn on in radio mode and then change

the frequency band 

→ 

MEDIA

: change to media mode and from there

select the media source 

→ 

PHONE

: access the telephone interface. If there is

no telephone interface installed, the current au-

dio source is muted

APP

: access the interface with App-Connect

→ 

SETUP

: press to show additional functions related

to the current mode (radio, media, etc.).

→ 



Clean the display
To clean, turn the radio off.
To clean the display, use a soft and clean cloth,

lightly humidified with clean water or a cleaning

cloth that may be obtained at a Volkswagen

dealership 

→ 

.

Soften resistant dirt with a humidified cloth, tak-

ing care not to damage the radio.

Do not dry clean the display. Doing so may cause

scratches that cannot be removed.
●

Do not use aggressive or solvent-based clean-

ing products. Such cleaning products may

damage the radio and leave the display “mis-

ty”.

●

Exert only a light pressure when cleaning the

display.



181.5L6.R34.20